HardLabs

Vectorscope GuyFawkes

shabaz123·Vectorscope_GuyFawkes

Vectorscope GuyFawkes PCB layout, top view — open source RP2040/RP2350 board by shabaz123

About the Vectorscope GuyFawkes PCB

Vectorscope GuyFawkes is an open source RP2040/RP2350 PCB design by shabaz123, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 14 × 1 mm, with 81 components from 35 distinct parts.

Its main chip is the Pi Pico, from the RP2040/RP2350 family. Other key parts include the AK4619, LMV324, TLC59283, TPA321 and LM4040C30. By type, the board carries 24 capacitors, 16 resistors, 15 switches, 8 diodes, 6 ICs and 5 connectors.

From the project

A reimplementation of the Vectorscope from https://github.com/Hack-a-Day/Vectorscope

A reimplementation of the Vectorscope from https://github.com/Hack-a-Day/Vectorscope

This version is simply called Vectorscope_GuyFawkes for no other reason other than to identify it from the various other implementations, since it was created on a November.

This version was created using KiCad without importing any schematic or PCB or Gerber files, since I didn't know of a way to do that. No guarantee it will work!

Main components on the Vectorscope GuyFawkes

AK4619LMV324TLC59283TPA321Pi PicoLM4040C30

Vectorscope GuyFawkes bill of materials (BOM)

81 components, 35 distinct parts.

QtyPartRefs
1
AK4619
U1
1
LMV324
U2
1
TLC59283
U3
1
TPA321
U4
1
Pi Pico
U5
1
LM4040C30
U6
1
DMG2305UX
Q1
1
SIGGEN
J1
1
ANAIO
J2
1
SCOPE
J3
1
GPIO
J4
1
VBAT/I2C
J5
2
AA
B1, B2
1
LCD-ATM0128B1
DISP1
1
Speaker
LS1
1
EXT_VIN
PAD1
9
PTS645S-TACT-6mm-SMT
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
3
PUSH-SWITCH-12mm
SW10, SW11, SW12
1
SW-5POS
SW13
1
SPDT-PWR
SW14
Show 15 more
QtyPartRefs
1
RST
SW15
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
1
47uH
L1
3
22u
C1, C2, C22
10
100n
C3, C4, C10, C11, C13, C17, C18, C19 +2
11
2.2u
C5, C6, C7, C8, C9, C12, C14, C15 +3
1
22R
R1
3
2.7k
R2, R12, R13
4
4.7k
R3, R5, R6, R7
1
22k
R4
1
33R
R8
3
680R
R9, R10, R11
1
10k
R14
1
220k
R15
1
100R
R16

Vectorscope GuyFawkes design files

The KiCad project lives in the shabaz123/Vectorscope_GuyFawkes repository on GitHub; these links point at the commit this page was built from.

Vectorscope GuyFawkes: common questions

What microcontroller does the Vectorscope GuyFawkes use?

The Vectorscope GuyFawkes is built around the Pi Pico, from the RP2040/RP2350 family.

How big is the Vectorscope GuyFawkes PCB?

The Vectorscope GuyFawkes measures 14 × 1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vectorscope GuyFawkes?

81 components, from 35 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vectorscope GuyFawkes design files?

From the shabaz123/Vectorscope_GuyFawkes repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vectorscope GuyFawkes design in my own project?

Yes, under the terms of its GPL-3.0 license, which shabaz123 chose for the repository.

Can I test firmware for the Vectorscope GuyFawkes without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards