30 open source boards using the LMV324

Real designs built with the LMV324, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the LMV324

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the LMV324 connects to, and the resistors, capacitors and other passives placed on it.

  • The V- pin is tied to GND on 17 of 18 designs.
  • The + pins have a series resistor on 13 of 18 designs, most often 100 kΩ (then 180 kΩ).
  • The - pins have a series resistor on 11 of 18 designs, most often 510 Ω (then 1 kΩ).
  • The V+ pin has a decoupling capacitor on 11 of 18 designs, most often 100 nF (then 1 µF).
Pin 1Connected to: The microcontroller 28%
  • Series resistor on 56% · 510 Ω (2), 560 Ω (2), 4.7 kΩ (1)
-pin 2, 6, 9, 13Connected to: The microcontroller 25%
  • Series resistor on 61% · 510 Ω (8), 1 kΩ (6), 4.7 kΩ (4)
+pin 3, 5, 10, 12Connected to: Signal 85%
  • Series resistor on 72% · 100 kΩ (9), 180 kΩ (8), 51 kΩ (7)
  • Resistor to GND on 50% · 348 kΩ (8), 91 kΩ (4), 3.3 kΩ (3)
  • Capacitor to GND on 39% · 1 µF (20), 100 nF (5), 10 nF (1)
V+pin 4Connected to: 3.3V 89%
  • Decoupling capacitor on 61% · 100 nF (7), 1 µF (4), 2.2 µF (2)
Pin 7Connected to: The microcontroller 28%
  • Series resistor on 50% · 510 Ω (2), 560 Ω (2), 1 kΩ (2)
Pin 8Connected to: The microcontroller 28%
  • Series resistor on 56% · 510 Ω (2), 560 Ω (2), 1 kΩ (2)
V-pin 11Connected to: GND 94%
Pin 14Connected to: The microcontroller 22%
  • Series resistor on 44% · 510 Ω (2), 560 Ω (2), 4.7 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BusPirate-5-rev10 by DangerousPrototypes, Smoothiev2-prime by Smoothieware, ML0 by brucemack and HALPI2-hardware by hatlabs.

The LMV324 in open source designs

The gallery holds 30 open source boards using the LMV324 from 18 GitHub repositories; a typical one measures about 72.6 × 66.8 mm and carries around 71 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is BusPirate-5-rev10 by DangerousPrototypes.

Microcontrollers on boards using the LMV324

LMV324: common questions

Where can I find a LMV324 reference design?

Each of the 30 boards on this page is a real design using the LMV324. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMV324 V- pin connected?

The V- pin is tied to GND on 17 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the LMV324.

What resistor goes on the LMV324 + pin?

The + pins have a series resistor on 13 of 18 designs, most often 100 kΩ (then 180 kΩ). Counted from the KiCad layouts of 18 open source designs using the LMV324.

What resistor goes on the LMV324 - pin?

The - pins have a series resistor on 11 of 18 designs, most often 510 Ω (then 1 kΩ). Counted from the KiCad layouts of 18 open source designs using the LMV324.

What parts are used alongside the LMV324?

The LMV321, AMS1117-3.3, LMV331, RP2040 and AP2127 appear in the most repositories here.

Which microcontrollers do boards using the LMV324 use?

Most are built on NXP (9), STM32 (8), RP2040/RP2350 (4) and ESP32 (2).

How big is a typical board using the LMV324?

The median is 72.6 × 66.8 mm, and 60% are two-layer designs.

What is the most popular open source board using the LMV324?

By GitHub stars, BusPirate-5-rev10 by DangerousPrototypes, with 124 stars.

Can I simulate one of these boards using the LMV324 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part