555-timer learning kit
Shambo-Ghosh·555-timer-learning-kit·PCB/555_learning_kit.kicad_pcb
About the 555-timer learning kit PCB
555-timer learning kit is an open source AVR/Arduino PCB design by Shambo-Ghosh, published on GitHub. It is a 2-layer board measuring 88.5 × 93 mm, with 34 components from 22 distinct parts.
Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the NE555P. By type, the board carries 14 capacitors, 7 resistors, 4 connectors, 4 diodes, 2 ICs and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
Electronics and PCB Design — Project 1 Designed for the Electronics Engineering department of Pragyan College
Electronics and PCB Design — Project 1 Designed for the Electronics Engineering department of Pragyan College
The 555 Timer Learning Kit is a compact, self-contained teaching board built around the classic NE555 timer IC. It lets first-year students turn a knob, swap a timing capacitor, and watch the resulting waveform live on an OLED screen — connecting the maths of RC timing to something they can actually see.
Main components on the 555-timer learning kit
555-timer learning kit bill of materials (BOM)
34 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | ATmega328P-P | DIP-28_W7.62mm | U2 |
| 1 | 16MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 2 | 100k | Potentiometer_Bourns_3386P_Vertical | RV1, RV2 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | LED | LED_D5.0mm | D2, D3 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 8 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C7, C8, C9, C12, C13, C14 |
| 1 | 1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 10uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 2 | 22pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C10, C11 |
| 1 | 330 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 300 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
555-timer learning kit design files
The KiCad project lives in the Shambo-Ghosh/555-timer-learning-kit repository on GitHub; these links point at the commit this page was built from.
555-timer learning kit: common questions
What microcontroller does the 555-timer learning kit use?
The 555-timer learning kit is built around the ATmega328P-P, from the AVR/Arduino family.
How big is the 555-timer learning kit PCB?
The 555-timer learning kit measures 88.5 × 93 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555-timer learning kit?
34 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the 555-timer learning kit design files?
From the Shambo-Ghosh/555-timer-learning-kit repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 555-timer learning kit design in my own project?
The repository has no license, so all rights stay with Shambo-Ghosh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 555-timer learning kit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k