HardLabs

Du Dad 2HP

shannon-greenlight·spankulator·DuDad/DuDad2HP-Board/DuDad2HP.kicad_pcb

Du Dad 2HP PCB layout, top view — open source board by shannon-greenlight

About the Du Dad 2HP PCB

Du Dad 2HP is an open source PCB design by shannon-greenlight, published on GitHub. It is a 2-layer board measuring 10 × 110 mm, with 20 components from 13 distinct parts.

By type, the board carries 9 resistors, 4 transistors, 3 connectors, 3 diodes and 1 switch.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

The Spankulator is a WiFi-enabled multi-function Eurorack module. Its main function is to generate a trio of coordinated analog and digital signals which can be used in an endless variety of ways. While each output generates familiar signals, it is the coordination of these signa

The Spankulator is a WiFi-enabled multi-function Eurorack module. Its main function is to generate a trio of coordinated analog and digital signals which can be used in an endless variety of ways. While each output generates familiar signals, it is the coordination of these signals and the methods of control that make the Spankulator special.

If starting from a bare circuit board, the BOM for the Spankulator is in bom/Digi-Key/spankulator_full.csv. This file can be directly uploaded to Digi-Key for buying parts.

Du Dad 2HP bill of materials (BOM)

20 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
C266589
MMBT3906
Q1, Q2, Q4
1
C8545
2N7002
Q3
1
C178296
EXP
J1
1
USB_B_Micro
J2
1
C386737
USB_A
J3
1
Reset
SW1
1
RED LED
D1
1
GREEN LED
D2
1
YELLOW LED
D3
2
C17782
620
R1, R4
4
C17621
30K
R2, R5, R7, R8
1
C17513
1K
R3
2
C17414
10K
R6, R9

Du Dad 2HP design files

The KiCad project lives in the shannon-greenlight/spankulator repository on GitHub; these links point at the commit this page was built from.

Du Dad 2HP: common questions

How big is the Du Dad 2HP PCB?

The Du Dad 2HP measures 10 × 110 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Du Dad 2HP?

20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Du Dad 2HP design files?

From the shannon-greenlight/spankulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Du Dad 2HP design in my own project?

The repository has no license, so all rights stay with shannon-greenlight. Use it as a reference, and ask the author before reusing the design.

More boards in spankulator

Similar boards