Macropad
shaoming11·macropad·pcb/kicad.kicad_pcb
About the Macropad PCB
Macropad is an open source RP2040/RP2350 PCB design by shaoming11, published on GitHub. It is a 2-layer board measuring 59.5 × 62.9 mm, with 8 components from 4 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 2 diodes, 1 IC and 1 LED.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Seeed XIAO RP2040 - since you're soldering, you can mount it SMD style! Please note it is significantly harder than doing it through-hole, so if it's your first time soldering I would avoid it.
Main components on the Macropad
Macropad bill of materials (BOM)
8 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 4 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | ~ | SSD1306-0.91-OLED-4pin-128x32 | OLED_0.1 |
| 2 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2 |
Macropad design files
The KiCad project lives in the shaoming11/macropad repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/kicad.kicad_pcb
- Schematicpcb/kicad.kicad_sch
Macropad: common questions
What microcontroller does the Macropad use?
The Macropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Macropad PCB?
The Macropad measures 59.5 × 62.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Macropad?
8 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Macropad design files?
From the shaoming11/macropad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Macropad design in my own project?
The repository has no license, so all rights stay with shaoming11. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Macropad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k