QUARK

shaxntanu·QUARK·hardware/QUARK_SuperMini_Carrier/QUARK_SuperMini_Carrier.kicad_pcb

QUARK PCB layout, top view — open source ESP32 board by shaxntanu

About the QUARK PCB

QUARK is an open source ESP32 PCB design by shaxntanu, published on GitHub. It is a 2-layer board measuring 70.1 × 55.4 mm, with 11 components from 10 distinct parts.

Its main chip is the ESP32-C3 SuperMini / 2x8 socket, from the ESP32 family. By type, the board carries 3 connectors, 2 diodes, 2 capacitors, 2 resistors, 1 IC and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

A plug-and-play ESP32-C3 desktop monitor for real-time Codex AI usage, quotas, tokens, and system telemetry.

KiCad source for a two-layer carrier board that connects QUARK's ESP32-C3 SuperMini, OLED, mode switch, page button, passive piezo, and red/blue status LEDs.

- QUARKSuperMiniCarrier.kicadpro — KiCad project. - QUARKSuperMiniCarrier.kicadsch — schematic. - QUARKSuperMiniCarrier.kicadpcb — routed PCB. - QUARK.kicadsym, QUARK.pretty/, and the library tables — project-local symbol and footprint libraries. - BOM.csv — board and off-board parts. - firmware/QUARKESP32-C3SuperMiniCDC.bin — merged 4 MB ESP32-C3 flash image with USB CDC on boot enabled. - fabrication/ — Gerbers, Excellon drill files…

Main components on the QUARK

ESP32-C3 SuperMini / 2x8 socket

QUARK bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3 SuperMini / 2x8 socket
U1
1
OLED: GND / 3V3 / SCL / SDA
J1
1
Mode: AI / COM / SYS(open)
J2
1
Passive piezo: GPIO / GND
J3
1
Page / refresh
SW1
1
Red 3mm
D1
1
Blue 3mm
D2
1
10uF
C1
1
100nF
C2
2
330R
R1, R2

QUARK design files

The KiCad project lives in the shaxntanu/QUARK repository on GitHub; these links point at the commit this page was built from.

QUARK: common questions

What microcontroller does the QUARK use?

The QUARK is built around the ESP32-C3 SuperMini / 2x8 socket, from the ESP32 family.

How big is the QUARK PCB?

The QUARK measures 70.1 × 55.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the QUARK?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the QUARK design files?

From the shaxntanu/QUARK repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the QUARK design in my own project?

The repository has no license, so all rights stay with shaxntanu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the QUARK without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards