Adafruit BMP280 STEMMA QT
ShekharShwetank·Breakout_Boards·BMP280/Adafruit BMP280 STEMMA QT/Adafruit BMP280 STEMMA QT/Adafruit BMP280 STEMMA QT.kicad_pcb
About the Adafruit BMP280 STEMMA QT PCB
Adafruit BMP280 STEMMA QT is an open source PCB design by ShekharShwetank, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 17.8 mm, with 16 components from 12 distinct parts.
Other key parts include the BMP280_COMBO and AP2112K-3.3. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 2 diodes, 1 transistor and 1 jumper.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Custom Breakout Board files that I needed (since couldn't find these specific ones) to be used in EDA tools like KiCAD, or Altium Designer while working as Electronics Lead of Enthalpy (Student Rocketry Team) or while interning as Avionics Engineer at Spantrik
Main components on the Adafruit BMP280 STEMMA QT
Adafruit BMP280 STEMMA QT bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMP280_COMBO | BMX280_COMBO | U1 |
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | BSS138 | SOT363 | Q2 |
| 2 | STEMMA_I2C_QT | JST_SH4 | CONN3, CONN4 |
| 1 | HEADER-1X770MIL | 1X07_ROUND_70 | JP1 |
| 1 | SOLDERJUMPER | SOLDERJUMPER_ARROW_NOPASTE | SJ1 |
| 1 | GREEN | CHIPLED_0603_NOOUTLINE | D1 |
| 1 | 1N4148 | SOD-323 | D2 |
| 1 | 0.1uF | 0603-NO | C1 |
| 2 | 10uF | 0805-NO | C2, C3 |
| 3 | 10K | 0603-NO | R1, R4, R5 |
| 1 | 10K | RESPACK_4X0603 | R3 |
Adafruit BMP280 STEMMA QT design files
The KiCad project lives in the ShekharShwetank/Breakout_Boards repository on GitHub; these links point at the commit this page was built from.
Adafruit BMP280 STEMMA QT: common questions
How big is the Adafruit BMP280 STEMMA QT PCB?
The Adafruit BMP280 STEMMA QT measures 25.4 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit BMP280 STEMMA QT?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit BMP280 STEMMA QT design files?
From the ShekharShwetank/Breakout_Boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit BMP280 STEMMA QT design in my own project?
Yes, under the terms of its MIT license, which ShekharShwetank chose for the repository.
More boards in Breakout_Boards
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k