Adafruit BNO055 STEMMA QT
ShekharShwetank·Breakout_Boards·bno055/Adafruit BNO055 STEMMA QT/Adafruit BNO055 STEMMA QT.kicad_pcb
About the Adafruit BNO055 STEMMA QT PCB
Adafruit BNO055 STEMMA QT is an open source PCB design by ShekharShwetank, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 20.3 mm, with 24 components from 18 distinct parts.
Other key parts include the AP2112K-3.3 and BNO055. By type, the board carries 6 ICs, 6 capacitors, 3 resistors, 2 jumpers, 2 diodes and 1 transistor.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Custom Breakout Board files that I needed (since couldn't find these specific ones) to be used in EDA tools like KiCAD, or Altium Designer while working as Electronics Lead of Enthalpy (Student Rocketry Team) or while interning as Avionics Engineer at Spantrik
PCB files for the BNO055 Breakout. Format is EagleCAD schematic and board layout https://www.adafruit.com/product/2472 https://www.adafruit.com/product/4646
If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The sensor fusion algorithms (the secret sauce that blends accelerometer, magnetometer and gyroscope data into stable three-axis orientation output) can be mind-numbingly difficult to get…

Main components on the Adafruit BNO055 STEMMA QT
Adafruit BNO055 STEMMA QT bill of materials (BOM)
24 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | BNO055 | BNO055 | U$2 |
| 1 | — | ADAFRUIT_3.5MM | U$51 |
| 1 | — | PCBFEAT-REV-040 | U$52 |
| 2 | — | STEMMAQT | U$53, U$54 |
| 1 | BSS138 | SOT363 | Q3 |
| 1 | 32.768 | XTAL3215 | X2 |
| 2 | STEMMA_I2C_QT | JST_SH4 | CONN3, CONN4 |
| 1 | — | 1X04_ROUND_76 | JP2 |
| 1 | — | 1X06_ROUND_70 | JP3 |
| 1 | — | SOLDERJUMPER_ARROW_NOPASTE | SJ1 |
| 1 | 1n4148 | SOD-323 | D1 |
| 1 | GREEN | CHIPLED_0603_NOOUTLINE | D2 |
| 2 | 22pF | 0603-NO | C1, C2 |
| 2 | 0.1uF | 0603-NO | C3, C9 |
| 2 | 10uF | 0805-NO | C7, C8 |
| 2 | 10K | RESPACK_4X0603 | R1, R3 |
| 1 | 10K | 0603-NO | R4 |
Adafruit BNO055 STEMMA QT design files
The KiCad project lives in the ShekharShwetank/Breakout_Boards repository on GitHub; these links point at the commit this page was built from.
Adafruit BNO055 STEMMA QT: common questions
How big is the Adafruit BNO055 STEMMA QT PCB?
The Adafruit BNO055 STEMMA QT measures 25.4 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit BNO055 STEMMA QT?
24 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit BNO055 STEMMA QT design files?
From the ShekharShwetank/Breakout_Boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit BNO055 STEMMA QT design in my own project?
Yes, under the terms of its MIT license, which ShekharShwetank chose for the repository.
More boards in Breakout_Boards
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k