RawWaves

SherpaModular·RawWaves·Hardware/KiCad/RawWavesV2.kicad_pcb

RawWaves PCB layout, top view — open source NXP board by SherpaModular

About the RawWaves PCB

RawWaves is an open source NXP PCB design by SherpaModular, published on GitHub. It is a 2-layer board measuring 20 × 107 mm, with 55 components from 32 distinct parts.

Its main chip is the TEENSY4.0, from the NXP family. Other key parts include the PT8211, LM1117MP-5.0, MCP6002 and TL072. By type, the board carries 20 resistors, 11 capacitors, 6 connectors, 5 ICs, 5 LEDs and 2 fuses.

It belongs with the audio and rf & radio designs in this gallery.

From the project

Raw Waves is a eurorack synthesizer module that plays RAW or WAV sample files from a micro SDcard. It is a derivate work of "Radio Music" from Tom Whitwell. Raw Waves is released under a CC-by-SA 3.0 license.

Raw Waves v2 is a sample player that functions much like a live radio. Audio sample files may be placed on a MicroSD card, and arranged into "banks" (like channels) which you may select either manually through the panel knobs, or via CV. File formats supported include RAW and WAV files.

The module is functionally identical to the popular "Raw Waves" module, and its predecessor, "Radio Music" by Tom Whitwell of Music Thing Modular. These previous modules are no longer available, having been built upon the now-discontinued Teensy 3 microcontroller.

Main components on the RawWaves

RawWaves bill of materials (BOM)

55 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TEENSY4.0
Teensy4.0
U1
1
PT8211
U2
1
LM1117MP-5.0
U4
1
MCP6002
MCP6002-xSN
U5
1
TL072
U6
1
MMBT3904
Q1
1
STATION_CV
J1
1
RESET-CV
J2
1
Micro_SD_Card
J3
1
EURO_PWR_2X5
EURO_PWR_2x5
J4
1
OUTPUT
J5
1
START_CV
J6
2
Polyfuse_Small
F1, F2
1
B50K
R_STATION
RV1
1
B50K
R_START
RV2
1
SW_DIP_X01
SW_DIP_x01
SW1
1
LED1
LED1
1
LED2
LED2
1
LED3
LED3
1
LED4
LED4
Show 12 more
QtyPartRefs
1
RESET_LED
RESET_LED1
2
1N5819
D7, D8
6
100nF
C1, C2, C5, C7, C10, C11
3
10uF
C3, C4, C9
2
1nF
C6, C8
6
100k
R1, R8, R12, R16, R19, R20
7
10k
R2, R3, R4, R5, R10, R14, R15
2
5.6k
R6, R7
1
330k
R9
1
120k
R11
1
1k
R13
2
200k
R17, R18

RawWaves design files

The KiCad project lives in the SherpaModular/RawWaves repository on GitHub; these links point at the commit this page was built from.

RawWaves: common questions

What microcontroller does the RawWaves use?

The RawWaves is built around the TEENSY4.0, from the NXP family.

How big is the RawWaves PCB?

The RawWaves measures 20 × 107 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RawWaves?

55 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RawWaves design files?

From the SherpaModular/RawWaves repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RawWaves design in my own project?

The repository has no license, so all rights stay with SherpaModular. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RawWaves without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards