10 open source boards using the PT8211
Real designs built with the PT8211, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
RawWaves
SherpaModular
20 × 107 mm55 parts2LNo license2610knobs PT8211
tomcombriat
99.9 × 80 mm56 parts2LGPL-3.09RP2040/RP2350
SumaShield
hugelton
83 × 99 mm83 parts2LMIT1ESP32
PLL AM OSC 1 7
Gloeidraad
160 × 100 mm168 parts2LNo license0FlailDriver
hhaudio
19.1 × 212.7 mm85 parts2LNo license0WCH CH32/CH55x
The usb c audio dongle
tobycm
30 × 50 mm43 parts6LMIT0Pico synthesizer
ice458
21 × 51 mm22 parts2LMIT0NXP
MakerSkillsAudioBoard
csdhku
17.8 × 35.6 mm11 parts2LNo license0ESP32
PLL AM OSC 1 5a
Gloeidraad
159.5 × 99.5 mm161 parts2LNo license0RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67
How designs wire the PT8211
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PT8211 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 µF).
- The RCH pin has a series capacitor on 5 of 9 designs, most often 10 µF (then 100 nF).
- The LCH pin has a series resistor on 4 of 9 designs, most often 7.5 kΩ (then 1 kΩ).
- The RCH pin has a series resistor on 4 of 9 designs, most often 7.5 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 4 | Connected to: GND 100% | — |
| VDDpin 5 | Connected to: 3.3V 78% · a signal 22% |
|
| LCHpin 6 | Connected to: Signal 78% · not connected 22% |
|
| NCpin 7 | Connected to: Not connected 100% | — |
| RCHpin 8 | Connected to: Signal 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 16bit by bread-modular, RawWaves by SherpaModular, 10knobs PT8211 by tomcombriat and SumaShield by hugelton.
The PT8211 in open source designs
The gallery holds 10 open source boards using the PT8211 from 9 GitHub repositories; a typical one measures about 30.2 × 89.5 mm and carries around 57 components.
90% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is 16bit by bread-modular.
Microcontrollers on boards using the PT8211
What boards using the PT8211 are built for
PT8211: common questions
Where can I find a PT8211 reference design?
Each of the 10 boards on this page is a real design using the PT8211. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PT8211 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the PT8211.
How is the PT8211 RCH pin connected?
The RCH pin has a series capacitor on 5 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the PT8211.
What resistor goes on the PT8211 LCH pin?
The LCH pin has a series resistor on 4 of 9 designs, most often 7.5 kΩ (then 1 kΩ). Counted from the KiCad layouts of 9 open source designs using the PT8211.
Which microcontrollers do boards using the PT8211 use?
Most are built on ESP32 (2), NXP (2), RP2040/RP2350 (2) and WCH CH32/CH55x (1).
How big is a typical board using the PT8211?
The median is 30.2 × 89.5 mm, and 90% are two-layer designs.
What is the most popular open source board using the PT8211?
By GitHub stars, 16bit by bread-modular, with 67 stars.
Can I simulate one of these boards using the PT8211 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.