Kicad project3 -12V-Linear-Regulator using-LM7812
Shivasailanathan-helps·Kicad_project3_-12V-Linear-Regulator-using-LM7812
About the Kicad project3 -12V-Linear-Regulator using-LM7812 PCB
Kicad project3 -12V-Linear-Regulator using-LM7812 is an open source PCB design by Shivasailanathan-helps, published on GitHub. It is a 2-layer board measuring 53.2 × 29.6 mm, with 12 components from 9 distinct parts.
Other key parts include the LM7812_TO220. By type, the board carries 5 diodes, 3 capacitors, 2 connectors, 1 IC and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
This project features the schematic capture and dual-layer PCB layout of a +12V Regulated DC Power Supply, designed in KiCad EDA. The board converts an AC input into a clean, stable +12V DC output suitable for powering sensitive analog/digital electronics and bench prototyping setups.
The top-layer red copper pour (F.Cu) is intentionally restricted to the right half of the board, while the bottom-layer blue ground plane (B.Cu) extends across the entire PCB. This design decision is based on three core PCB engineering principles:
Main components on the Kicad project3 -12V-Linear-Regulator using-LM7812
Kicad project3 -12V-Linear-Regulator using-LM7812 bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7812_TO220 | TO-220-3_Vertical | U1 |
| 1 | AC IN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | DC OUT | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 4 | D | D_A-405_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED_Small | LED_1206_3216Metric | D5 |
| 1 | 1000uF/25V | C_Elec_8x10.2 | C1 |
| 1 | 470uF/16V | C_Elec_6.3x7.7 | C2 |
| 1 | 104 | C_1206_3216Metric | C3 |
| 1 | 1K | R_1206_3216Metric | R1 |
Kicad project3 -12V-Linear-Regulator using-LM7812 design files
The KiCad project lives in the Shivasailanathan-helps/Kicad_project3_-12V-Linear-Regulator-using-LM7812 repository on GitHub; these links point at the commit this page was built from.
Kicad project3 -12V-Linear-Regulator using-LM7812: common questions
How big is the Kicad project3 -12V-Linear-Regulator using-LM7812 PCB?
The Kicad project3 -12V-Linear-Regulator using-LM7812 measures 53.2 × 29.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad project3 -12V-Linear-Regulator using-LM7812?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad project3 -12V-Linear-Regulator using-LM7812 design files?
From the Shivasailanathan-helps/Kicad_project3_-12V-Linear-Regulator-using-LM7812 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad project3 -12V-Linear-Regulator using-LM7812 design in my own project?
The repository has no license, so all rights stay with Shivasailanathan-helps. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k