HardLabs

Shlok EnC Inductions

Shlol762·Shlok_EnC_Inductions·PCB/mcu_breakout_board/esp32-breakout.kicad_pcb

Shlok EnC Inductions PCB layout, top view — open source ESP32 board by Shlol762

About the Shlok EnC Inductions PCB

Shlok EnC Inductions is an open source ESP32 PCB design by Shlol762, published on GitHub. It is a 2-layer board measuring 96.5 × 93 mm, with 23 components from 14 distinct parts.

Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. Other key parts include the MPU6050breakout. By type, the board carries 7 connectors, 6 resistors, 4 diodes, 3 ICs and 3 switches.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This directory contains KiCad 7 schematics, layouts, and custom footprint/symbol libraries for the Kratos Induction tasks.

Main components on the Shlok EnC Inductions

ESP32-S3-DevKitCMPU6050breakout

Shlok EnC Inductions bill of materials (BOM)

23 components, 14 distinct parts.

QtyPartRefs
1
ESP32-S3-DevKitC
U1
1
MPU6050breakout
U2
1
~
U4
1
Conn_01x08_Pin
J1
1
Conn_01x02_Pin
J2
1
ServoFL
J3
1
ServoFR
J4
1
ServoRL
J5
1
ServoRR
J6
1
Conn_01x02_Pin
J7
3
SW_SPDT
SW1, SW2, SW3
4
LED
D1, D2, D3, D4
5
1k
R1, R2, R3, R4, R5
1
2k
R6

Shlok EnC Inductions design files

The KiCad project lives in the Shlol762/Shlok_EnC_Inductions repository on GitHub; these links point at the commit this page was built from.

Shlok EnC Inductions: common questions

What microcontroller does the Shlok EnC Inductions use?

The Shlok EnC Inductions is built around the ESP32-S3-DevKitC, from the ESP32 family.

How big is the Shlok EnC Inductions PCB?

The Shlok EnC Inductions measures 96.5 × 93 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Shlok EnC Inductions?

23 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Shlok EnC Inductions design files?

From the Shlol762/Shlok_EnC_Inductions repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Shlok EnC Inductions design in my own project?

The repository has no license, so all rights stay with Shlol762. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Shlok EnC Inductions without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards