HardLabs

Zensai75 UNI i1

shoonie-desu·zensai_pcb·75/UNI_i1/UNI_i1.kicad_pcb

Zensai75 UNI i1 PCB layout, top view — open source board by shoonie-desu

About the Zensai75 UNI i1 PCB

Zensai75 UNI i1 is an open source PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 342.9 × 123.8 mm, with 187 components from 10 distinct parts.

By type, the board carries 100 switches, 84 diodes and 2 connectors.

From the project

pcbs for zensai boards

Zensai75 UNI i1 bill of materials (BOM)

187 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
CONN_01X19_PIN
Conn_01x19_Pin
J1, J2
1
R_Potentiometer_MountingPin
RV1
4
MX_stab
S29, S46, S62, S64
1
MX_stab
S84
1
MX_stab
S85
90
MX_SW_solder
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +82
1
SW_PUSH_45DEG
MX_SW_solder
SW76
2
RotaryEncoder_Switch
SW92, SW93
1
SW_Push_45deg
SW94
84
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +76

Zensai75 UNI i1 design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

Zensai75 UNI i1: common questions

How big is the Zensai75 UNI i1 PCB?

The Zensai75 UNI i1 measures 342.9 × 123.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zensai75 UNI i1?

187 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Zensai75 UNI i1 design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Zensai75 UNI i1 design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

More boards in zensai_pcb