C8v1

shoonie-desu·zensai_pcb·60/c8v1/c8v1.kicad_pcb

About the C8v1 PCB

C8v1 is an open source RP2040/RP2350 PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 285.8 × 95.3 mm, with 177 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the XC6206P332MR-G and W25Q16JVUXIQ. By type, the board carries 82 switches, 66 diodes, 17 capacitors, 7 resistors, 3 ICs and 1 crystal.

From the project

pcbs for zensai boards

Main components on the C8v1

XC6206P332MR-G RP2040 W25Q16JVUXIQ

C8v1 bill of materials (BOM)

177 components, 16 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	XC6206P332MR-G	SOT-23-3	U1
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U2
1	W25Q16JVUXIQ	Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm	U3
1	CRYSTAL_GND24 Crystal_GND24	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	ZX-SH1.0-4PWT	JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal	J1
38	CPG151101S11	SW_MX_1u_mod	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +30
44	CPG151101S11	SW_MX_1u_mod	SW39, SW40, SW41, SW42, SW43, SW44, SW45, SW46 +36
39	1N4148W	D_SOD-123_mod	D1, D2, D3, D4, D5, D6, D7, D8 +31
27	1N4148W	D_SOD-123_mod	D17, D35, D42, D43, D44, D45, D46, D47 +19
5	1u	C_0402_1005Metric_mod	C1, C5, C13, C14, C15
9	100N 100n	C_0402_1005Metric_mod	C2, C3, C6, C7, C8, C9, C10, C11 +1
1	10U 10u	C_0402_1005Metric_mod	C4
2	22P 22p	C_0402_1005Metric_mod	C16, C17
2	27	R_0402_1005Metric	R1, R2
3	5.1K 5.1k	R_0402_1005Metric	R3, R5, R6
2	1k	R_0402_1005Metric	R4, R7

C8v1 design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

C8v1: common questions

What microcontroller does the C8v1 use?

The C8v1 is built around the RP2040, from the RP2040/RP2350 family.

How big is the C8v1 PCB?

The C8v1 measures 285.8 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the C8v1?

177 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the C8v1 design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the C8v1 design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the C8v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.