TAKO i5

shoonie-desu·zensai_pcb·65/TAKO_i5/TAKO_i5.kicad_pcb

TAKO i5 PCB layout, top view — open source RP2040/RP2350 board by shoonie-desu

About the TAKO i5 PCB

TAKO i5 is an open source RP2040/RP2350 PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 323.9 × 95.3 mm, with 162 components from 17 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the XC6206PXXXMR and W25Q128JVS. By type, the board carries 69 switches, 65 diodes, 16 capacitors, 7 resistors, 3 ICs and 1 crystal.

From the project

pcbs for zensai boards

Main components on the TAKO i5

RP2040 XC6206PXXXMR W25Q128JVS

TAKO i5 bill of materials (BOM)

162 components, 17 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	XC6206PXXXMR XC6206PxxxMR	SOT-23-3	U2
1	W25Q128JVS	SOIC-8_5.23x5.23mm_P1.27mm	U4
1	CRYSTAL_GND24 Crystal_GND24	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	ZX-SH1.0-4PWT Megastar	JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal	J1
3	MX_stab	STAB_MX_P_2u	S15, S47, S49
1	MX_stab	STAB_MX_P_6.25u	S68
63	MX_SW_solder	SW_MX_HS_S_1u	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +55
2	RotaryEncoder_Switch	ROT_Alps_EC11E-Switch	SW32, SW48
65	D_Small	D_SOD-123_CLEAN	D1, D2, D3, D4, D5, D6, D7, D8 +57
5	1u	C_0402_1005Metric	C1, C2, C4, C6, C12
1	10U 10u	C_0603_1608Metric	C3
8	100N 100n	C_0402_1005Metric	C5, C7, C8, C9, C13, C14, C15, C16
2	22P 22p	C_0402_1005Metric	C10, C11
3	5.1K 5.1k	R_0402_1005Metric	R3, R8, R9
2	27	R_0402_1005Metric	R4, R5
2	1k	R_0402_1005Metric	R6, R7

TAKO i5 design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

TAKO i5: common questions

What microcontroller does the TAKO i5 use?

The TAKO i5 is built around the RP2040, from the RP2040/RP2350 family.

How big is the TAKO i5 PCB?

The TAKO i5 measures 323.9 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TAKO i5?

162 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TAKO i5 design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TAKO i5 design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TAKO i5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in zensai_pcb

Similar boards