TAKO i5v6+

shoonie-desu·zensai_pcb·65/TAKO_i5v6+/TAKO_i5v6+.kicad_pcb

TAKO i5v6+ PCB layout, top view — open source RP2040/RP2350 board by shoonie-desu

About the TAKO i5v6+ PCB

TAKO i5v6+ is an open source RP2040/RP2350 PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 323.9 × 95.3 mm, with 172 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the XC6206PXXXMR and W25Q128JVS. By type, the board carries 77 switches, 65 diodes, 16 capacitors, 7 resistors, 3 ICs and 2 connectors.

From the project

pcbs for zensai boards

Main components on the TAKO i5v6+

RP2040 XC6206PXXXMR W25Q128JVS

TAKO i5v6+ bill of materials (BOM)

172 components, 22 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	XC6206PXXXMR XC6206PxxxMR	SOT-23-3	U2
1	W25Q128JVS	SOIC-8_5.23x5.23mm_P1.27mm	U4
1	CRYSTAL_GND24 Crystal_GND24	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	ZX-SH1.0-4PWT Megastar	JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal	J1
1	CONN_01X05 Conn_01x05	PinHeader_1x05_P1.27mm_Vertical	J3
1	info	info	H5
3	MX_stab	STAB_MX_P_2u	S15, S47, S50
1	MX_stab	STAB_MX_P_6.25u	S70
1	MX_stab	STAB_MX_P_7u	S71
68	SW_MX_HS_S	SW_MX_HS_S_CPG151101S11_1u	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +60
2	RotaryEncoder_Switch	ROT_Alps_EC11E-Switch	SW32, SW48
1	SW_RESET	PinHeader_1x02_P1.27mm_Vertical	SW78
1	SW_BOOTSEL	PinHeader_1x02_P1.27mm_Vertical	SW79
65	D_Small	D_SOD-123_CLEAN	D1, D2, D3, D4, D5, D6, D7, D8 +57
5	1u	C_0402_1005Metric	C1, C2, C4, C6, C12
1	10U 10u	C_0603_1608Metric	C3
8	100N 100n	C_0402_1005Metric	C5, C7, C8, C9, C13, C14, C15, C16
2	22P 22p	C_0402_1005Metric	C10, C11
3	5.1K 5.1k	R_0402_1005Metric	R3, R8, R9

Show 2 more

Qty	Part	Footprint	Refs
2	27	R_0402_1005Metric	R4, R5
2	1k	R_0402_1005Metric	R6, R7

TAKO i5v6+ design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

Layout65/TAKO_i5v6+/TAKO_i5v6+.kicad_pcb
Schematic65/TAKO_i5v6+/TAKO_i5v6+.kicad_sch
BOM65/TAKO_i5v6+/production/bom.csv

TAKO i5v6+: common questions

What microcontroller does the TAKO i5v6+ use?

The TAKO i5v6+ is built around the RP2040, from the RP2040/RP2350 family.

How big is the TAKO i5v6+ PCB?

The TAKO i5v6+ measures 323.9 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TAKO i5v6+?

172 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TAKO i5v6+ design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TAKO i5v6+ design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TAKO i5v6+ without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in zensai_pcb

Similar boards