Temp UNI i5

shoonie-desu·zensai_pcb·template/UNI_i5/UNI_i5.kicad_pcb

Temp UNI i5 PCB layout, top view — open source RP2040/RP2350 board by shoonie-desu

About the Temp UNI i5 PCB

Temp UNI i5 is an open source RP2040/RP2350 PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 442.8 × 111.7 mm, with 279 components from 24 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the XC6206PXXXMR, W25Q128JVS and SRV05-4. By type, the board carries 136 switches, 110 diodes, 16 capacitors, 9 resistors, 4 ICs and 2 connectors.

From the project

pcbs for zensai boards

Main components on the Temp UNI i5

XC6206PXXXMR RP2040 W25Q128JVS SRV05-4

Temp UNI i5 bill of materials (BOM)

279 components, 24 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	XC6206PXXXMR XC6206PxxxMR	SOT-23-3	U1
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U2
1	W25Q128JVS	SOIC-8_5.23x5.23mm_P1.27mm	U3
1	SRV05-4	SOT-23-6-routable	U4
1	CRYSTAL_GND24 Crystal_GND24	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	CONN_01X05 Conn_01x05	PinHeader_1x05_P1.27mm_Vertical	J1
1	USB_C_Receptacle_USB2.0	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J2
1	Fuse_Small	Fuse_1206_3216Metric	F1
8	MX_stab	STAB_MX_P_2u	S33, S56, S63, S79, S84, S95, S100, S121
1	MX_stab	STAB_MX_P_6.25u	S108
1	MX_stab	STAB_MX_P_7u	S109
123	MX_SW_solder	SW_MX_1u	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +115
1	RotaryEncoder_Switch	ROT_Alps_EC11E-Switch	SW18
1	SW_RESET	PinHeader_1x02_P1.27mm_Vertical	SW125
1	SW_BOOTSEL	PinHeader_1x02_P1.27mm_Vertical	SW126
110	D_Small	D_SOD-123_CLEAN	D1, D2, D3, D4, D5, D6, D7, D8 +102
5	1u	C_0402_1005Metric	C1, C5, C13, C14, C16
8	100N 100n	C_0402_1005Metric	C2, C3, C6, C7, C8, C9, C10, C11
1	10U 10u	C_0603_1608Metric	C4
2	22P 22p	C_0402_1005Metric	C12, C15

Show 4 more

Qty	Part	Footprint	Refs
2	27	R_0402_1005Metric	R1, R2
2	5.1k	R_0402_1005Metric	R3, R5
2	1k	R_0402_1005Metric	R4, R9
3	5.1K 5.1k	R_0402_1005Metric	R6, R7, R8

Temp UNI i5 design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

Temp UNI i5: common questions

What microcontroller does the Temp UNI i5 use?

The Temp UNI i5 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Temp UNI i5 PCB?

The Temp UNI i5 measures 442.8 × 111.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temp UNI i5?

279 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Temp UNI i5 design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Temp UNI i5 design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Temp UNI i5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in zensai_pcb

Similar boards