Zensai60S UNI i1

shoonie-desu·zensai_pcb·60S/UNI_i1/UNI_LEFT_i1.kicad_pcb

Zensai60S UNI i1 PCB layout, top view — open source RP2040/RP2350 board by shoonie-desu

About the Zensai60S UNI i1 PCB

Zensai60S UNI i1 is an open source RP2040/RP2350 PCB design by shoonie-desu, published on GitHub. It is a 2-layer board measuring 323.9 × 95.3 mm, with 178 components from 27 distinct parts.

Its main chip is the XC6206PXXXMR, from the RP2040/RP2350 family. Other key parts include the RP2040 and W25Q128JVS. By type, the board carries 83 switches, 66 diodes, 16 capacitors, 7 resistors, 3 ICs and 2 connectors.

From the project

pcbs for zensai boards

Main components on the Zensai60S UNI i1

XC6206PXXXMR RP2040 W25Q128JVS

Zensai60S UNI i1 bill of materials (BOM)

178 components, 27 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	XC6206PXXXMR RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	RP2040 XC6206PxxxMR	SOT-23-3	U2
1	W25Q128JVS	SOIC-8_5.23x5.23mm_P1.27mm	U4
1	CRYSTAL_GND24 Crystal_GND24	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	Conn_01x04	Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical	J2
1	Conn_01x05	PinHeader_1x05_P1.27mm_Vertical	J3
4	MX_stab	STAB_MX_P_2u	S15, S31, S47, S49
1	MX_stab	STAB_MX_P_6.25u	S68
1	MX_stab	STAB_MX_P_7u	S69
73	MX_SW_solder	SW_MX_1u	SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +65
2	RotaryEncoder_Switch	ROT_Alps_EC11E-Switch	SW32, SW48
1	SW_RESET	PinHeader_1x02_P1.27mm_Vertical	SW76
1	SW_BOOTSEL	PinHeader_1x02_P1.27mm_Vertical	SW77
66	D_Small	D_SOD-123_CLEAN	D1, D2, D3, D4, D5, D6, D7, D8 +58
1	1u	C_0402_1005Metric	C1
2	100N 1u	C_0402_1005Metric	C2, C6
1	100N 10u	C_0603_1608Metric	C3
1	10U 1u	C_0402_1005Metric	C4
4	100n	C_0402_1005Metric	C5, C13, C14, C16
3	100N 100n	C_0402_1005Metric	C7, C8, C9

Show 7 more

Qty	Part	Footprint	Refs
2	100N 22p	C_0402_1005Metric	C10, C11
1	22P 1u	C_0402_1005Metric	C12
1	22P 100n	C_0402_1005Metric	C15
2	5.1k	R_0402_1005Metric	R3, R9
2	27	R_0402_1005Metric	R4, R5
2	5.1K 1k	R_0402_1005Metric	R6, R7
1	5.1K 5.1k	R_0402_1005Metric	R8

Zensai60S UNI i1 design files

The KiCad project lives in the shoonie-desu/zensai_pcb repository on GitHub; these links point at the commit this page was built from.

Zensai60S UNI i1: common questions

What microcontroller does the Zensai60S UNI i1 use?

The Zensai60S UNI i1 is built around the XC6206PXXXMR, from the RP2040/RP2350 family.

How big is the Zensai60S UNI i1 PCB?

The Zensai60S UNI i1 measures 323.9 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zensai60S UNI i1?

178 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Zensai60S UNI i1 design files?

From the shoonie-desu/zensai_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Zensai60S UNI i1 design in my own project?

The repository has no license, so all rights stay with shoonie-desu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Zensai60S UNI i1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in zensai_pcb

Similar boards