5V regulated power supply
shounak-max·pcb_designs·pcb_designs/5V regulated power supply pcbdesign.kicad_pcb
About the 5V regulated power supply PCB
5V regulated power supply is an open source PCB design by shounak-max, published on GitHub. It is a 2-layer board measuring 67 × 61.6 mm, with 14 components from 10 distinct parts.
Other key parts include the L7805. By type, the board carries 5 diodes, 3 capacitors, 2 connectors, 1 IC, 1 fuse and 1 transformer.
It belongs with the power & battery designs in this gallery.
From the project
badmoshl_ka_repo
Main components on the 5V regulated power supply
5V regulated power supply bill of materials (BOM)
14 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | AC_INPUT | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | (+5v, gnd) | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Bulgin_FX0457_Horizontal_Closed | F1 |
| 1 | TRANSFORMER_1P_1S Transformer_1P_1S | Transformer_CHK_EI30-2VA_1xSec | T1 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED | LED_D3.0mm | D5 |
| 1 | 470UF 470uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 2 | 0.1UF 0.1uF | CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | 150 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
5V regulated power supply design files
The KiCad project lives in the shounak-max/pcb_designs repository on GitHub; these links point at the commit this page was built from.
5V regulated power supply: common questions
How big is the 5V regulated power supply PCB?
The 5V regulated power supply measures 67 × 61.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 5V regulated power supply?
14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 5V regulated power supply design files?
From the shounak-max/pcb_designs repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the 5V regulated power supply design in my own project?
The repository has no license, so all rights stay with shounak-max. Use it as a reference, and ask the author before reusing the design.
More boards in pcb_designs
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k