Onyx2040

shreya-0718·onyx2040·pcb/onyx2040.kicad_pcb

Onyx2040 PCB layout, top view — open source RP2040/RP2350 board by shreya-0718

About the Onyx2040 PCB

Onyx2040 is an open source RP2040/RP2350 PCB design by shreya-0718, published on GitHub under the MIT license. It is a 2-layer board measuring 21 × 51 mm, with 39 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVSS. By type, the board carries 17 capacitors, 8 resistors, 5 LEDs, 4 connectors, 3 ICs and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

a devboard made with the RP2040 chip!

I built this project as a way to learn full PCB design, from schematics to routing to firmware. It’s also a great way for others to prototype their own ideas, with colorful lighting built in to make experimentation more fun and expressive.

And here is the finished PCB in the editor:

This is what the final devboard will look like:

Onyx2040, from the project README
From the project README

Main components on the Onyx2040

Onyx2040 bill of materials (BOM)

39 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q16JVSS
U3
1
12 MHz
Y1
2
Conn_01x20
J1, J3
1
Conn_01x03
J2
1
USB_C_Receptacle_USB2.0_14P
J4
1
SW_Push
SW1
5
WS2812B-2020
LED1, LED2, LED3, LED4, LED5
2
1uF
C1, C12
11
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10uF
C10, C11
2
33pF
C16, C17
2
5.1k
R1, R2
2
27
R3, R4
1
330
R5
2
1k
R6, R8
1
10k
R7

Onyx2040 design files

The KiCad project lives in the shreya-0718/onyx2040 repository on GitHub; these links point at the commit this page was built from.

Onyx2040: common questions

What microcontroller does the Onyx2040 use?

The Onyx2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Onyx2040 PCB?

The Onyx2040 measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Onyx2040?

39 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Onyx2040 design files?

From the shreya-0718/onyx2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Onyx2040 design in my own project?

Yes, under the terms of its MIT license, which shreya-0718 chose for the repository.

Can I test firmware for the Onyx2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards