Starpad

shreya-0718·starpad·pcb/starpad.kicad_pcb

Starpad PCB layout, top view — open source RP2040/RP2350 board by shreya-0718

About the Starpad PCB

Starpad is an open source RP2040/RP2350 PCB design by shreya-0718, published on GitHub under the MIT license. It is a 2-layer board measuring 84.6 × 88.5 mm, with 29 components from 6 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 18 diodes, 9 switches, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

a cute diy macropad!

link to my journal.md: starpad - journal

- 1x Seeed Studio XIAO RP2040 - 1x 0.91" OLED Display - 8x Cherry MX Switches - 8x DSA Keycaps - 1x EC11 Rotary Encoder - 9x 1N4148 Diodes - 9x SK6812 MINI-E LEDs - 4x M3x16mm Screws - 4x M3x5mm Heatset Inserts - 1x 3D-printed knob for the rotary encoder - 1x 3D-printed case (with 2 pieces)

Starpad, from the project README
From the project README

Main components on the Starpad

Starpad bill of materials (BOM)

29 components, 6 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
OLED - Conn_01x04
J1
8
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1
RotaryEncoder_Switch
SW10
9
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +1
9
SK6812
D10, D11, D12, D13, D14, D15, D16, D17 +1

Starpad design files

The KiCad project lives in the shreya-0718/starpad repository on GitHub; these links point at the commit this page was built from.

Starpad: common questions

What microcontroller does the Starpad use?

The Starpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Starpad PCB?

The Starpad measures 84.6 × 88.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starpad?

29 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starpad design files?

From the shreya-0718/starpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starpad design in my own project?

Yes, under the terms of its MIT license, which shreya-0718 chose for the repository.

Can I test firmware for the Starpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards