Flexsonic 2
Shri-2112·Flexsonic·PCBs/Flexsonic_2.kicad_pcb
About the Flexsonic 2 PCB
Flexsonic 2 is an open source PCB design by Shri-2112, published on GitHub. It is a 2-layer board measuring 45 × 22.3 mm, with 9 components from 8 distinct parts.
By type, the board carries 6 connectors, 1 switch, 1 diode and 1 resistor.
It belongs with the sensors and audio designs in this gallery.
From the project
Hardware: - ESP32 - Flex Sensors - MPU6050 - DFPlayer Mini - Speaker - SD Card
Hardware: - ESP32 - Flex Sensors - MPU6050 - DFPlayer Mini - Speaker - SD Card
Software: - Arduino IDE / PlatformIO (ESP32 firmware) - C / Embedded C for driver code - Python (for ML model training & testing) - ML Libraries: scikit-learn
Frameworks/Tools: - FreeRTOS (ESP32 task scheduling) - I²C, UART communication protocols
Required libraries (Arduino/ESP32): - esp32 board support package - AdafruitMPU6050 - DFRobotDFPlayerMini`
Flexsonic 2 bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Uart_tx_rx | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | 5voutput | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 2 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J4, J7 |
| 1 | 5Vinput_Df | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | Speaker | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | SW_SPST | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 220 | R_0805_2012Metric | R1 |
Flexsonic 2 design files
The KiCad project lives in the Shri-2112/Flexsonic repository on GitHub; these links point at the commit this page was built from.
Flexsonic 2: common questions
How big is the Flexsonic 2 PCB?
The Flexsonic 2 measures 45 × 22.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flexsonic 2?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flexsonic 2 design files?
From the Shri-2112/Flexsonic repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Flexsonic 2 design in my own project?
The repository has no license, so all rights stay with Shri-2112. Use it as a reference, and ask the author before reusing the design.
More boards in Flexsonic
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956