Button
sifourquier·domotic_esp_hardware·light12V/button.kicad_pcb
About the Button PCB
Button is an open source PCB design by sifourquier, published on GitHub. It is a 2-layer board measuring 53.5 × 108.5 mm, with 49 components from 31 distinct parts.
Other key parts include the PCF8885TS, ESP-07v2 and TPS62172. By type, the board carries 14 capacitors, 11 connectors, 11 resistors, 3 ICs, 2 transistors and 2 diodes.
From the project
hardware for a system based on esp8266
Electronic for light(12v) and/or tactil switch. the board are in 2 parte one with capasitive (tactile) switch and one with 2x12V pwm out. Power by 230V/110V for light or light+switch Power 2 battery 1.2V/1.5V (supply betwen 2.5(2.4V) and 3.6V) for switch only
Main components on the Button
Button bill of materials (BOM)
49 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF8885TS | TSSOP-28_4.4x9.7mm_Pitch0.65mm | U1 |
| 1 | ESP-07v2 | ESP-07v2_small | U2 |
| 1 | TPS62172 | DFN-8-1EP_2x2mm_Pitch0.5mm | U3 |
| 2 | NMOS | D-Pak_TO252AA | Q1, Q2 |
| 3 | CONN_2 | bornier2 | P1, P4, P5 |
| 1 | CONN_6 | Pin_Header_Straight_1x06 | P2 |
| 1 | CONN_01X09 | Pin_Header_Straight_1x09 | P3 |
| 4 | CONN_01X01 | 1pin | P6, P7, P8, P11 |
| 1 | CONN_2 | Pin_Header_Straight_1x02 | P9 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03 | P10 |
| 1 | BATTERY | JWT_Vertical_A3963-RM3.96mm-2 | BT1 |
| 1 | FUSE | C_1812_HandSoldering | F1 |
| 1 | SW_PUSH | SW_SPST_EVQP0 | SW1 |
| 1 | Vigotronix 230V ->12V | Transfo 12V | T1 |
| 1 | VR | C_Disc_D6_P5 | VR1 |
| 1 | LED | LED_0805 | D1 |
| 1 | D_Schottky | SOD-123 | D2 |
| 1 | 2.2>3.3uH | CC12CC | L1 |
| 1 | 22uF | C_0805 | C1 |
| 10 | 100nF | C_0603 | C2, C3, C4, C5, C6, C7, C10, C11 +2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C | C_Rect_L18_W5_P15 | C8 |
| 1 | 10uF 12V | C_0805 | C9 |
| 1 | 2.2uF | C_0603 | C13 |
| 4 | 10k | R_0603 | R1, R2, R4, R5 |
| 1 | R | R_0603 | R3 |
| 1 | 2.2M | R_0603 | R6 |
| 1 | 1M | R_0603 | R7 |
| 1 | 0 | R_0805 | R8 |
| 1 | NC | R_0603 | R9 |
| 1 | 1M | C_0603 | R10 |
| 1 | 380k | C_0603 | R11 |
Button design files
The KiCad project lives in the sifourquier/domotic_esp_hardware repository on GitHub; these links point at the commit this page was built from.
Button: common questions
How big is the Button PCB?
The Button measures 53.5 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Button?
49 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Button design files?
From the sifourquier/domotic_esp_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Button design in my own project?
The repository has no license, so all rights stay with sifourquier. Use it as a reference, and ask the author before reusing the design.
More boards in domotic_esp_hardware
Esp8266 test board (Copie en conflit de Steven 2015-08-28)
sifourquier
64 × 80 mm120 parts2LNo license0ESP8266
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)
sifourquier
51.7 × 52.9 mm55 parts2LNo license0.kicad
sifourquier
52.2 × 52.9 mm51 parts2LNo license0Esp8266 test board (Copie en conflit de Simon Fourquier 2015-08-26)
sifourquier
64 × 21.5 mm32 parts2LNo license0Esp8266 test board
sifourquier
64 × 21.5 mm31 parts2LNo license0