.kicad
sifourquier·domotic_esp_hardware·Triac/.kicad_pcb.kicad_pcb
About the .kicad PCB
.kicad is an open source PCB design by sifourquier, published on GitHub. It is a 2-layer board measuring 52.2 × 52.9 mm, with 51 components from 32 distinct parts.
Other key parts include the TLI4970-D050T4, TCLD1000, MOC3023SM, BTB08-600SRG and ESP-07V2. By type, the board carries 14 resistors, 9 connectors, 9 capacitors, 7 ICs, 3 fuses and 3 diodes.
From the project
hardware for a system based on esp8266
Electronic for controling 230V (triac) and mesuring consumption Use for 230V (light control) Use for pilot wire radiator If add an external power supply and mosN you can use for low voltage light (for exemple 36V led) by adding external quadratur sensor, powwer suply and Hbridge(DRV8871) you can control a motor (for exemple awning)
fixme the VTX-214-001-103 need be soldering befor esp8266 if creat a new pcb try to change VTX-214-001-103 by VTX-214-001-303 (for reduct consumption)
Main components on the .kicad
.kicad bill of materials (BOM)
51 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLI4970-D050T4 | PG-TISION-8-1 | IC1 |
| 1 | TCLD1000 | DIP-4_long_SMD | IC2 |
| 2 | MOC3023SM | DIP-6__300_SMD | U1, U6 |
| 2 | BTB08-600SRG | TO220_VERT | U2, U7 |
| 1 | ESP-07V2 | ESP-07v2 | U3 |
| 1 | BC847B | SOT23 | Q1 |
| 3 | CONN_2 | bornier2 | P1, P3, P5 |
| 3 | CONN_4X2 | conn_2x4_1.27_smd | P2, P4, P9 |
| 3 | CONN_2 | SIL-2 | P6, P7, P8 |
| 1 | FUSE 1A | FSUPCMS | F1 |
| 2 | FUSE 6A | FUSE7-20 | F2, F3 |
| 1 | CONN_3 | SIL-3 | K1 |
| 2 | KSR231G LFS | SW_PUSH_SMD_2pad | SW1, SW2 |
| 1 | RAC01 3.3V | RAC01 | T1 |
| 1 | LED_blue | SM0603 | D1 |
| 2 | BAS 21-03W E6327 | SOD323-REFLOW | D2, D3 |
| 1 | MCAP115018077A | self | L1 |
| 1 | 1uF 16v | SM1206 | C1 |
| 1 | 330uF | c_elec_6.3x7.7 | C2 |
| 3 | 100nF | SM0603 | C3, C6, C9 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47nF | SM1206 | C4, C5 |
| 1 | 10uF | SM0603 | C7 |
| 1 | 47nF | C230v | C8 |
| 2 | 1M | SM1206 | R1, R2 |
| 1 | MCSR431K07DS | C2 | R3 |
| 1 | 22k | SM0603 | R4 |
| 1 | 470E | SM0603 | R5 |
| 1 | 27 | SM0603 | R6 |
| 3 | R | SM0603 | R8, R11, R12 |
| 2 | 330 | SM1206 | R9, R16 |
| 2 | 470 | SM1206 | R10, R18 |
| 1 | 10k | SM0603 | R14 |
.kicad design files
The KiCad project lives in the sifourquier/domotic_esp_hardware repository on GitHub; these links point at the commit this page was built from.
.kicad: common questions
How big is the .kicad PCB?
The .kicad measures 52.2 × 52.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the .kicad?
51 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the .kicad design files?
From the sifourquier/domotic_esp_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the .kicad design in my own project?
The repository has no license, so all rights stay with sifourquier. Use it as a reference, and ask the author before reusing the design.
More boards in domotic_esp_hardware
Esp8266 test board (Copie en conflit de Steven 2015-08-28)
sifourquier
64 × 80 mm120 parts2LNo license0ESP8266
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)
sifourquier
51.7 × 52.9 mm55 parts2LNo license0Button
sifourquier
53.5 × 108.5 mm49 parts2LNo license0Esp8266 test board (Copie en conflit de Simon Fourquier 2015-08-26)
sifourquier
64 × 21.5 mm32 parts2LNo license0Esp8266 test board
sifourquier
64 × 21.5 mm31 parts2LNo license0