Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)
sifourquier·domotic_esp_hardware·meteo/esp8266_test_board (Copie en conflit de Simon Fourquier 2015-04-21).kicad_pcb
About the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) is an open source ESP8266 PCB design by sifourquier, published on GitHub. It is a 2-layer board measuring 51.7 × 52.9 mm, with 55 components from 40 distinct parts.
Its main chip is the ESP8266-DEV-OLIMEX, from the ESP8266 family. Other key parts include the ACS758, MB8S, HTS221, BMP280 and 4N33SM. By type, the board carries 21 resistors, 10 capacitors, 9 ICs, 4 connectors, 2 fuses and 2 switches.
It belongs with the sensors designs in this gallery.
From the project
hardware for a system based on esp8266
Electronic for meteo sensors (Temperature Humidity Pressure) Power by 1 or 2 battery 1.2V/1.5V or 5V (mini USB) 1 batterie R14 can spupply for more of 6 months if configured on static ip
FIXME If use with only 1battery the stepup are to low current i have fix it by using 0x220uF on the power but work only if the connection time are low (use IP fix do not use dhcp) If you use a rechargabel battery you can chage with connecting to usb but the heating of charge distorts the measure
Main components on the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) bill of materials (BOM)
55 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACS758 | PFF | IC1 |
| 1 | MB8S | MB8S | U1 |
| 1 | HTS221 | hlga-6l | U2 |
| 1 | BMP280 | LGA8_2.0×2.5 | U3 |
| 1 | 4N33SM | DIP-6__300_SMD | U4 |
| 1 | ESP8266-DEV-OLIMEX | ESP8266_olimex_dev | U5 |
| 1 | MOC3023SM | DIP-6__300_SMD | U6 |
| 1 | BTB08-600SRG | TO220_VERT | U7 |
| 1 | AT42QT1010 | SOT23_6 | U8 |
| 1 | BC847B | sot23 | Q1 |
| 2 | CONN_2 | bornier2 | P1, P3 |
| 1 | CONN_2 | SIL-2 | P2 |
| 1 | CONN_8 | SIL-8_smd | P4 |
| 1 | CONN_1 | SIL-1 | CAP1 |
| 1 | FUSE 1A | FSUPCMS | F1 |
| 1 | FUSE 6A | FUSE7-20 | F2 |
| 1 | CONN_3 | SIL-3 | K1 |
| 2 | KSR231G LFS | SW_PUSH_SMD_2pad | SW1, SW2 |
| 1 | RAC01 3.3V | RAC01 | T1 |
| 1 | LED_blue | SM0603 | D1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAS 21-03W E6327 | SOD323-REFLOW | D2 |
| 1 | MCAP115018077A | self | L1 |
| 1 | 10uF 16v | SM1206 | C1 |
| 1 | 330uF | c_elec_6.3x7.7 | C2 |
| 4 | 100nF | SM0603 | C3, C6, C9, C10 |
| 2 | 47nF | SM1206 | C4, C8 |
| 1 | nc | SM0603 | C5 |
| 1 | 22nF? | SM0603 | C7 |
| 2 | 220k | SM1206 | R1, R2 |
| 1 | MCSR431K07DS | C2 | R3 |
| 2 | 22k | SM0603 | R4, R20 |
| 1 | 470E | SM0603 | R5 |
| 4 | 1K | SM0603 | R6, R9, R17, R19 |
| 3 | 10k | SM0603 | R7, R11, R21 |
| 1 | 0.1 | SM0603 | R8 |
| 3 | 0? | SM0603 | R10, R12, R13 |
| 1 | 4.7k | SM0603 | R14 |
| 1 | 330 | SM0603 | R15 |
| 1 | 330 | SM1206 | R16 |
| 1 | 470 | SM1206 | R18 |
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) design files
The KiCad project lives in the sifourquier/domotic_esp_hardware repository on GitHub; these links point at the commit this page was built from.
Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21): common questions
What microcontroller does the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) use?
The Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) is built around the ESP8266-DEV-OLIMEX, from the ESP8266 family.
How big is the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)?
The Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) measures 51.7 × 52.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21)?
55 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) design files?
From the sifourquier/domotic_esp_hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) design in my own project?
The repository has no license, so all rights stay with sifourquier. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp8266 test board (Copie en conflit de Simon Fourquier 2015-04-21) without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in domotic_esp_hardware
Esp8266 test board (Copie en conflit de Steven 2015-08-28)
sifourquier
64 × 80 mm120 parts2LNo license0.kicad
sifourquier
52.2 × 52.9 mm51 parts2LNo license0Button
sifourquier
53.5 × 108.5 mm49 parts2LNo license0Esp8266 test board (Copie en conflit de Simon Fourquier 2015-08-26)
sifourquier
64 × 21.5 mm32 parts2LNo license0Esp8266 test board
sifourquier
64 × 21.5 mm31 parts2LNo license0
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398