Receiver test
About the Receiver test PCB
Receiver test is an open source PCB design by simonyiszk, published on GitHub. It is a 2-layer board measuring 63 × 56 mm, with 122 components from 54 distinct parts.
Other key parts include the ADE-1H+, SA612, MCP6D11 and FST3253. By type, the board carries 41 capacitors, 37 resistors, 18 inductors, 13 test points, 5 connectors and 4 ICs.
It belongs with the rf & radio designs in this gallery.
Main components on the Receiver test
Receiver test bill of materials (BOM)
122 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADE-1H+ | Mini-Circuits_CD542_LandPatternPL-052 | U1 |
| 1 | SA612 | SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP6D11 | MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | FST3253 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | MMBT5089 | SOT-23 | Q1 |
| 1 | BC847BS | SOT-363_SC-70-6 | Q2 |
| 1 | 28.224 MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | 5V | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | RF_IN | SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | IF_IN | SMA_Molex_73251-1153_EdgeMount_Horizontal | J3 |
| 2 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J4, J5 |
| 8 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | TestPoint_2Pole | PinHeader_1x02_P2.54mm_Vertical | TP9, TP10, TP11, TP12, TP13 |
| 1 | Red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 3 | 390n | L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1, L2, L3 |
| 1 | 39n | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 3 | 47n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5, L6, L7 |
| 1 | 180n | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L8 |
| 4 | 2u2 | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L9, L10, L13, L15 |
| 2 | 10u | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L11, L16 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 220n | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L12, L14 |
| 2 | 8u2 | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L17, L18 |
| 1 | 47u | CP_Elec_6.3x5.3 | C1 |
| 8 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C11, C12, C15, C16, C21, C39, C40 |
| 2 | 150p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6 |
| 2 | 270p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 3 | 390p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C9, C10 |
| 2 | 470p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C30 |
| 9 | 10n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14, C18, C19, C20, C22, C37, C38 +1 |
| 1 | 100p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C17 |
| 2 | 36p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C23, C24 |
| 2 | 33p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C25, C33 |
| 2 | 18p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26, C31 |
| 2 | 180p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C27, C32 |
| 1 | 68p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C28 |
| 1 | 15p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29 |
| 1 | 9p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C34 |
| 2 | 10p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C35, C36 |
| 1 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 12 | BP | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4, R7, R8, R9, R17, R19 +4 |
| 3 | 5k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R14 |
| 3 | 100 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R21 |
| 1 | 28k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 2 | 31k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R22 |
| 2 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15, R18 |
| 2 | 1.2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R24 |
| 1 | 19k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | 2k5 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R27 |
| 2 | 27 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R29, R30 |
| 1 | 33 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31 |
| 2 | 39 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R32, R33 |
| 1 | 10 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R34 |
| 2 | 47 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R35, R36 |
| 1 | 3 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R37 |
Receiver test design files
The KiCad project lives in the simonyiszk/open-hf-sdr repository on GitHub; these links point at the commit this page was built from.
- Layoutreceiver_test.kicad_pcb
Receiver test: common questions
How big is the Receiver test PCB?
The Receiver test measures 63 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Receiver test?
122 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Receiver test design files?
From the simonyiszk/open-hf-sdr repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Receiver test design in my own project?
The repository has no license, so all rights stay with simonyiszk. Use it as a reference, and ask the author before reusing the design.
More boards in open-hf-sdr
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372