6 open source boards using the SA612
Real designs built with the SA612, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
VNA
profdc9
100 × 85 mm178 parts2LNo license92Receiver test final
simonyiszk
63 × 56 mm126 parts2LNo license3Phoenix612 Complete v1.1
drajnauth
281.2 × 158.6 mm283 parts2LCC-BY-NC-4.01AVR/Arduino
7mhz ssb trx
ngs
84.5 × 93.4 mm82 parts2LNo license0Receiver test
simonyiszk
63 × 56 mm122 parts2LNo license3Receiver POC
drajnauth
100.1 × 100.1 mm68 parts2LCC-BY-NC-4.01
The SA612 in open source designs
The gallery holds 6 open source boards using the SA612 from 4 GitHub repositories; a typical one measures about 92.3 × 89.2 mm and carries around 124 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is VNA by profdc9.
Parts used alongside the SA612
Microcontrollers on boards using the SA612
What boards using the SA612 are built for
SA612: common questions
Where can I find a SA612 reference design?
Each of the 6 boards on this page is a real design using the SA612. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SA612 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the SA612?
The median is 92.3 × 89.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the SA612?
By GitHub stars, VNA by profdc9, with 92 stars.
Can I simulate one of these boards using the SA612 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.