Receiver test final
simonyiszk·open-hf-sdr
About the Receiver test final PCB
Receiver test final is an open source PCB design by simonyiszk, published on GitHub. It is a 2-layer board measuring 63 × 56 mm, with 126 components from 54 distinct parts.
Other key parts include the ADE-1H+, SA612, MCP6D11 and FST3253. By type, the board carries 44 capacitors, 38 resistors, 18 inductors, 13 test points, 5 connectors and 4 ICs.
It belongs with the rf & radio designs in this gallery.
Main components on the Receiver test final
Receiver test final bill of materials (BOM)
126 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADE-1H+ | Mini-Circuits_CD542_LandPatternPL-052 | U1 |
| 1 | SA612 | SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP6D11 | MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | FST3253 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | MMBT5089 | SOT-23 | Q1 |
| 1 | BC847BS | SOT-363_SC-70-6 | Q2 |
| 1 | 28.224 MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | 5V | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | RF_IN | SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | IF_IN | SMA_Molex_73251-1153_EdgeMount_Horizontal | J3 |
| 2 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J4, J5 |
| 8 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | TestPoint_2Pole | PinHeader_1x02_P2.54mm_Vertical | TP9, TP10, TP11, TP12, TP13 |
| 1 | Red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 3 | 390n | L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1, L2, L3 |
| 1 | 39n | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 3 | 47n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5, L6, L7 |
| 1 | 180n | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L8 |
| 4 | 2u2 | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L9, L10, L13, L15 |
| 2 | 10u | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L11, L16 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 220n | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L12, L14 |
| 2 | 8u2 | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L17, L18 |
| 1 | 47u | CP_Elec_6.3x5.3 | C1 |
| 10 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C11, C12, C15, C16, C21, C39, C40 +2 |
| 2 | 150p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6 |
| 2 | 270p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 3 | 390p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C9, C10 |
| 2 | 470p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C30 |
| 10 | 10n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14, C18, C19, C20, C22, C37, C38 +2 |
| 1 | 100p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C17 |
| 2 | 36p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C23, C24 |
| 2 | 33p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C25, C33 |
| 2 | 18p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26, C31 |
| 2 | 180p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C27, C32 |
| 1 | 68p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C28 |
| 1 | 15p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29 |
| 1 | 9p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C34 |
| 2 | 10p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C35, C36 |
| 1 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 12 | BP | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4, R7, R8, R9, R17, R19 +4 |
| 3 | 5k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R14 |
| 4 | 100 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R21, R38 |
| 1 | 28k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 2 | 31k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R22 |
| 2 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15, R18 |
| 2 | 1.2k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R24 |
| 1 | 19k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | 2k5 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R27 |
| 2 | 27 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R29, R30 |
| 1 | 33 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31 |
| 2 | 39 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R32, R33 |
| 1 | 10 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R34 |
| 2 | 47 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R35, R36 |
| 1 | 3 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R37 |
Receiver test final design files
The KiCad project lives in the simonyiszk/open-hf-sdr repository on GitHub; these links point at the commit this page was built from.
Receiver test final: common questions
How big is the Receiver test final PCB?
The Receiver test final measures 63 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Receiver test final?
126 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Receiver test final design files?
From the simonyiszk/open-hf-sdr repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Receiver test final design in my own project?
The repository has no license, so all rights stay with simonyiszk. Use it as a reference, and ask the author before reusing the design.
More boards in open-hf-sdr
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568