HardLabs

Kicad board-2026-07-29-rpi drone hat

SimulatedFlow·kicad-board-2026-07-29-rpi-drone-hat

Kicad board-2026-07-29-rpi drone hat layout, top view — open source board by SimulatedFlow

About the Kicad board-2026-07-29-rpi drone hat

Kicad board-2026-07-29-rpi drone hat is an open source PCB design by SimulatedFlow, published on GitHub under the Custom license license. It is a 4-layer board measuring 65 × 56 mm, with 5 components from 5 distinct parts.

It belongs with the robotics & motion, dev boards & breakouts and sensors designs in this gallery.

From the project

Raspberry Pi drone HAT - carrier board with 4 ESC outputs and IMU for Raspberry Pi based multicopters. Solder kit, bare PCB, KiCad sources.

This repository contains the full design files of a commercial hardware board. It is source-available, not open source: read it, evaluate it, then buy a license to use it. See LICENSE.md (source-available, purchase required).

Get it / Buy: - Order on eBay (this board, bare PCB): https://www.ebay.de/itm/398230767491 - Product page (specs, photos, price): https://simulatedflow.teufel-engineering.com/platinen/2026-07-29-rpi-drone-hat/ - eBay store — all our boards and PCB art: https://www.ebay.de/usr/simula-9 - Merch shop (dev & gaming): https://simulatedflow.myspreadshop.de - Merch shop…

Kicad board-2026-07-29-rpi drone hat bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESC_M1
J_M1
1
ESC_M2
J_M2
1
ESC_M3
J_M3
1
ESC_M4
J_M4
1
STATUS
LED1

Kicad board-2026-07-29-rpi drone hat design files

The KiCad project lives in the SimulatedFlow/kicad-board-2026-07-29-rpi-drone-hat repository on GitHub; these links point at the commit this page was built from.

Kicad board-2026-07-29-rpi drone hat: common questions

How big is the Kicad board-2026-07-29-rpi drone hat?

The Kicad board-2026-07-29-rpi drone hat measures 65 × 56 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Kicad board-2026-07-29-rpi drone hat?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicad board-2026-07-29-rpi drone hat design files?

From the SimulatedFlow/kicad-board-2026-07-29-rpi-drone-hat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kicad board-2026-07-29-rpi drone hat design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards