Inline-Voltage converter
SirBramble·Inline-Voltage-converter·PCB/Inline Voltage converter/Inline Voltage converter.kicad_pcb
About the Inline-Voltage converter PCB
Inline-Voltage converter is an open source PCB design by SirBramble, published on GitHub. It is a 2-layer board measuring 14.6 × 22.8 mm, with 14 components from 8 distinct parts.
Other key parts include the TPS63070RNMR. By type, the board carries 9 capacitors, 3 resistors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Small inline voltage converter: The Vuwu
This Project is a small adjustable Buck-Boost converter board, designed to be fitted inline with a Power Cable. It's only 14mmx22mm making it ideal for splicing in to a cable and wrapping it with heat shrink. The connectors used are 2 pin JST PH 2.0 SMD vertical. A Link to them can be found here.
The design files for KiCad are located in the folders. Alternatively you can use the GERBER Files with a preconfigured BOM to order them from JLCPCB.
Main components on the Inline-Voltage converter
Inline-Voltage converter bill of materials (BOM)
14 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS63070RNMR | TPS630701RNMR | IC1 |
| 1 | 1.5UH 1.5uH | L_Chilisin_BMRA00050530 | L1 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C2 |
| 2 | 10UF 10uF | C_0603_1608Metric | C3, C5 |
| 2 | 100N 100n | C_0603_1608Metric | C4, C9 |
| 3 | 22UF 22uF | C_0805_2012Metric | C6, C7, C8 |
| 2 | 10K 10k | R_0603_1608Metric | R1, R3 |
| 1 | 100K 100k | R_0603_1608Metric | R2 |
Inline-Voltage converter design files
The KiCad project lives in the SirBramble/Inline-Voltage-converter repository on GitHub; these links point at the commit this page was built from.
Inline-Voltage converter: common questions
How big is the Inline-Voltage converter PCB?
The Inline-Voltage converter measures 14.6 × 22.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inline-Voltage converter?
14 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inline-Voltage converter design files?
From the SirBramble/Inline-Voltage-converter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Inline-Voltage converter design in my own project?
The repository has no license, so all rights stay with SirBramble. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k