Numpad

SirBramble·The-Typeuwu·01 PCB/03 Numpad PCB/Numpad.kicad_pcb

Numpad PCB layout, top view — open source AVR/Arduino board by SirBramble

About the Numpad PCB

Numpad is an open source AVR/Arduino PCB design by SirBramble, published on GitHub under the MIT license. It is a 2-layer board measuring 126 × 126 mm, with 84 components from 18 distinct parts.

Its main chip is the ATMEGA328PB-AU, from the AVR/Arduino family. Other key parts include the -, SN74LVC2G17DCKR and EC12E1220301. By type, the board carries 29 capacitors, 22 ICs, 17 diodes, 7 connectors, 6 resistors and 1 crystal.

It belongs with the keyboards designs in this gallery.

From the project

The Type Universal Wordtyping Unit DIY Keyboard with magnetic Modules

The Typeuwu is a modular keyboard design that can be extended with magnetic modules. It also provides a connector for a optional Bluetooth and Battery module.\ The firmware is written in C++ and provides a recompile free key remapping with the AniMacro scripting language.

The Typeuwu uses a RP2040 as the core processor, that polls the keyboard matrix, controls the LEDs and handles the communication between The keyboard and PC.

Main components on the Numpad

Numpad bill of materials (BOM)

84 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
-
Multi_Hotswap_with_RGB
U1, U2, U3, U4, U5, U6, U7, U9 +8
2
-
Multi_Hotswap_with_RGB
U8, U15
1
-
Multi_Hotswap_with_RGB
U16
1
ATMEGA328PB-AU
ATmega328PB-A
U18
1
SN74LVC2G17DCKR
~
U19
1
EC12E1220301
~
U20
1
ABLS-16.000MHZ-D-3-Y-T
Y1
1
-
Display 1
J1
1
AVR-ISP-6
J2
1
-
Display 2
J3
4
CONN_01X04
Conn_01x04
J4, J5, J6, J7
2
PTA6043-2010CIB502
RV1, RV2
17
RB521S30T5G
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +9
26
CC0603KRX5R9BB104
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +18
1
CL10A105KB8NNNC
1uF
C21
2
0201N220J500CT
22pF
C22, C23
5
CRT0603-FZ-1002ELF
10k
R1, R3, R4, R5, R6
1
CR0603-FX-3300ELF
330
R2

Numpad design files

The KiCad project lives in the SirBramble/The-Typeuwu repository on GitHub; these links point at the commit this page was built from.

Numpad: common questions

What microcontroller does the Numpad use?

The Numpad is built around the ATMEGA328PB-AU, from the AVR/Arduino family.

How big is the Numpad PCB?

The Numpad measures 126 × 126 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Numpad?

84 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Numpad design files?

From the SirBramble/The-Typeuwu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Numpad design in my own project?

Yes, under the terms of its MIT license, which SirBramble chose for the repository.

Can I test firmware for the Numpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in The-Typeuwu

Similar boards