The Typeuwu

SirBramble·The-Typeuwu·01 PCB/01 The Typeuwu PCB/The Typeuwu.kicad_pcb

The Typeuwu PCB layout, top view — open source RP2040/RP2350 board by SirBramble

About the The Typeuwu PCB

The Typeuwu is an open source RP2040/RP2350 PCB design by SirBramble, published on GitHub under the MIT license. It is a 4-layer board measuring 352 × 126 mm, with 334 components from 40 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the LSF0204QPWRQ1, -, SRV05-4L-TP, W25Q128JVS and AP2112K-3.3TRG1. By type, the board carries 105 capacitors, 94 ICs, 91 diodes, 21 resistors, 9 connectors and 4 jumpers.

It belongs with the keyboards designs in this gallery.

From the project

The Type Universal Wordtyping Unit DIY Keyboard with magnetic Modules

The Typeuwu is a modular keyboard design that can be extended with magnetic modules. It also provides a connector for a optional Bluetooth and Battery module.\ The firmware is written in C++ and provides a recompile free key remapping with the AniMacro scripting language.

The Typeuwu uses a RP2040 as the core processor, that polls the keyboard matrix, controls the LEDs and handles the communication between The keyboard and PC.

Main components on the The Typeuwu

The Typeuwu bill of materials (BOM)

334 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LSF0204QPWRQ1
IC1
74
-
Multi_Hotswap_with_RGB
U1, U2, U3, U4, U5, U6, U7, U8 +66
1
-
Multi_Hotswap_with_RGB
U14
1
-
Multi_Hotswap_with_RGB
U15
1
-
Multi_Hotswap_with_RGB
U28
1
-
Multi_Hotswap_with_RGB
U29
8
-
Multi_Hotswap_with_RGB
U42, U55, U56, U57, U59, U60, U61, U62
1
-
Multi_Hotswap_with_RGB
U54
1
-
Multi_Hotswap_with_RGB
U58
2
SRV05-4L-TP
SRV05-4
U73, U74
1
RP2040
U201
1
W25Q128JVS
U202
1
AP2112K-3.3TRG1
AP2112K-3.3
U203
1
NX3225SA-12MHZ-STD-CSR-3
NX3225SA-12.000000MHZ
Y1
1
USB4105-GF-A
USB_C_Receptacle_USB2.0
J1
1
-
DEBUG
J2
4
CONN_01X04
Conn_01x04
J3, J4, J5, J6
1
M20-8900505
J7
2
CONN_01X02
Conn_01x02
J8, J9
1
PWR_5V
DL1
Show 20 more
QtyPartRefs
1
PWR_3V3
DL2
2
SOLDERJUMPER_2_BRIDGED
SolderJumper_2_Bridged
JP1, JP3
2
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP2, JP4
2
SJ2-35954B-SMT-TR
S1, S2
2
LINK
~
STAB14, STAB54
1
LINK
~
STAB58
1
611-PTS636SP50SMTRLF
BOOT
SW1
1
611-PTS636SP50SMTRLF
RESET
SW2
3
CD214A-B240LR
D01, D02, D03
88
750-CDBU40-HF
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +80
2
0603N8R0C500CT
8pF
C1, C2
4
CL10A105KB8NNNC
1u
C3, C6, C15, C16
99
CC0603KRX5R9BB104
100nF
C4, C5, C7, C8, C9, C10, C11, C12 +91
5
CR0603AFX-1001EAS
1k
R1, R3, R12, R15, R21
3
CRT0603-FZ-1002ELF
10k
R2, R8, R9
2
CR0603-FX-27R4ELF
27.4
R4, R5
2
CR0603AFX-5101EAS
5k1
R6, R7
2
CR0603AFX-1001EAS
R
R10, R11
6
RMC1/16K2201FTP
2k2
R13, R16, R17, R18, R19, R20
1
CR0603-FX-3300ELF
330
R14

The Typeuwu design files

The KiCad project lives in the SirBramble/The-Typeuwu repository on GitHub; these links point at the commit this page was built from.

The Typeuwu: common questions

What microcontroller does the The Typeuwu use?

The The Typeuwu is built around the RP2040, from the RP2040/RP2350 family.

How big is the The Typeuwu PCB?

The The Typeuwu measures 352 × 126 mm, has 4 copper layers and is 1.6116 mm thick.

How many components are on the The Typeuwu?

334 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the The Typeuwu design files?

From the SirBramble/The-Typeuwu repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the The Typeuwu design in my own project?

Yes, under the terms of its MIT license, which SirBramble chose for the repository.

Can I test firmware for the The Typeuwu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in The-Typeuwu

Similar boards