What you wanna call it

SirInfiniti·What-you-wanna-call-it·PCB/Bob.kicad_pcb

What you wanna call it PCB layout, top view — open source RP2040/RP2350 board by SirInfiniti

About the What you wanna call it PCB

What you wanna call it is an open source RP2040/RP2350 PCB design by SirInfiniti, published on GitHub. It is a 2-layer board measuring 72.5 × 79.5 mm, with 11 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 9 switches, 1 IC and 1 LED.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

A miniature keyboard to assist in all your needs, using KiCAD, Fusion, and KMK.

A miniature keyboard to assist in all your needs, using KiCAD, Fusion, and KMK.

1. 1 x JLCPCP Manufacturing PCB 2. 9 x Cherry MX Switches 3. 1 x Xiao RP2040 microcontrollers 4. 1x 0.91" OLED Display 5. 1 x Custom PCB 6. 9 x Cherry MX Keycaps 7. 4 x Screws 8. 4 x Heatset Inserts 9. 1 x 3d Printed Case

What you wanna call it, from the project README
From the project README

Main components on the What you wanna call it

What you wanna call it bill of materials (BOM)

11 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
1
SSD1306 0.91" OLED
OLED1

What you wanna call it design files

The KiCad project lives in the SirInfiniti/What-you-wanna-call-it repository on GitHub; these links point at the commit this page was built from.

What you wanna call it: common questions

What microcontroller does the What you wanna call it use?

The What you wanna call it is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the What you wanna call it PCB?

The What you wanna call it measures 72.5 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the What you wanna call it?

11 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the What you wanna call it design files?

From the SirInfiniti/What-you-wanna-call-it repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the What you wanna call it design in my own project?

The repository has no license, so all rights stay with SirInfiniti. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the What you wanna call it without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards