Novakey

Skynse·novakey·kicad_files/novakey_backup.kicad_pcb

Novakey PCB layout, top view — open source RP2040/RP2350 board by Skynse

About the Novakey PCB

Novakey is an open source RP2040/RP2350 PCB design by Skynse, published on GitHub. It is a 2-layer board measuring 159.7 × 92 mm, with 37 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the ER_OLEDM0.91_1X-I2C. By type, the board carries 19 switches, 16 diodes, 1 IC and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

Open source 16-key macropad with 3 push encoders

An open-source 16-key macropad with three rotary encoders, custom firmware, and a companion configuration app.

Studio is the desktop app for the novakey. It can be used to configure profiles and keybinds

The PCB was designed in KiCad. Source files are in kicadfiles/`.

The KiCad-exported BOM is in kicadfiles/billofmaterials.csv`.

Novakey, from the project README
From the project README

Main components on the Novakey

Novakey bill of materials (BOM)

37 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ER_OLEDM0.91_1X-I2C
ER_OLEDM0.91_1x-I2C
U2
1
RaspberryPi_Pico
A1
3
RotaryEncoder_Switch_MP
SW1, SW2, SW3
16
SW_PUSH_45DEG
SW_Push_45deg
SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 +8
16
D
D1, D2, D3, D4, D5, D6, D7, D8 +8

Novakey design files

The KiCad project lives in the Skynse/novakey repository on GitHub; these links point at the commit this page was built from.

Novakey: common questions

What microcontroller does the Novakey use?

The Novakey is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Novakey PCB?

The Novakey measures 159.7 × 92 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Novakey?

37 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Novakey design files?

From the Skynse/novakey repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Novakey design in my own project?

The repository has no license, so all rights stay with Skynse. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Novakey without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards