HardLabs

Ethernet4pizero poe

Slenderman00·ethernet4pizero-poe

Ethernet4pizero poe PCB layout, top view — open source Raspberry Pi board by Slenderman00

About the Ethernet4pizero poe PCB

Ethernet4pizero poe is an open source Raspberry Pi PCB design by Slenderman00, published on GitHub under the TAPR-OHL-1.0 license. It is a 4-layer board measuring 85 × 56 mm, with 34 components from 25 distinct parts.

Its main chip is the SSW-120-01-T-D-006, from the Raspberry Pi family. Other key parts include the ENC28J60x-SS, DSC1001DE1-025.0000 and TPS2375-1. By type, the board carries 15 resistors, 9 capacitors, 4 connectors, 3 ICs, 1 diode and 1 inductor.

From the project

The ethernet4pizero project is open hardware design of a Raspbery Pi shield that adds Ethernet over SPI connectivity with the ENC28J60 IC.

The ethernet4pizero project is open hardware design of a Raspbery Pi shield that adds Ethernet over SPI connectivity with the ENC28J60 IC.

The project includes schematics and PCB design files for KiCAD. The board can be used with the dtoverlay=enc28j60 option added to /boot/config.txt.

The project is published by Lightside Instruments AS under TAPR Open Hardware License. Read the LICENSE file for details.

Main components on the Ethernet4pizero poe

ENC28J60x-SSDSC1001DE1-025.0000TPS2375-1

Ethernet4pizero poe bill of materials (BOM)

34 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ENC28J60x-SS
U1
1
DSC1001DE1-025.0000
U2
1
TPS2375-1
U3
1
TSW-103-23-F-D
Conn_02x03
J1
1
SSW-120-01-T-D-006
Raspberry_Pi_2_3
J2
1
USB4105-15-A-120
USB_C_Receptacle_USB2.0
J3
1
RJMG1BD3B8K1ANR
RJ45_Abracon_ARJP11A-MASA-B-A-EMU2
J4
1
lsi-powermodule-7
LSI-U1
1
SMAJ58A
D4
1
MI1210K600R-10
L
L1
6
885012205037
100 nF
C1, C2, C5, C6, C7, C8
1
885012205012
0.01uF
C3
1
ZRB15XR61A106ME01D
10uF
C4
1
100nF 100V
C15
4
RC0402JR-0750RL
50
R1, R2, R3, R4
1
RC0402JR-100RL
0
R5
2
ERJ-2GEJ102X
1K
R6, R7
1
ERJ-2GEJ103X
10K
R8
1
ERJ-2RKF5101X
5.1K
R9
1
ERJ-2RKF2321X
2.32K
R10
Show 5 more
QtyPartRefs
1
5.1K
R11
1
0
R12
1
24.9K
R22
1
180K
R23
1
4.42K
R24

Ethernet4pizero poe design files

The KiCad project lives in the Slenderman00/ethernet4pizero-poe repository on GitHub; these links point at the commit this page was built from.

Ethernet4pizero poe: common questions

What microcontroller does the Ethernet4pizero poe use?

The Ethernet4pizero poe is built around the SSW-120-01-T-D-006, from the Raspberry Pi family.

How big is the Ethernet4pizero poe PCB?

The Ethernet4pizero poe measures 85 × 56 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Ethernet4pizero poe?

34 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ethernet4pizero poe design files?

From the Slenderman00/ethernet4pizero-poe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ethernet4pizero poe design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which Slenderman00 chose for the repository.

Can I test firmware for the Ethernet4pizero poe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards