2 open source boards using the TPS2375-1
Real designs built with the TPS2375-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiEthernet4pizero poe
Slenderman00
85 × 56 mm34 parts4LTAPR-OHL-1.00
Silicon LabsGated Passthrough
crawford
63.5 × 59.7 mm80 parts2LGPL-3.03
The TPS2375-1 in open source designs
The gallery holds 2 open source boards using the TPS2375-1 from 2 GitHub repositories; a typical one measures about 74.3 × 57.8 mm and carries around 57 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Gated Passthrough by crawford.
Microcontrollers on boards using the TPS2375-1
TPS2375-1: common questions
Where can I find a TPS2375-1 reference design?
Each of the 2 boards on this page is a real design using the TPS2375-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS2375-1 use?
Most are built on Raspberry Pi (1) and Silicon Labs (1).
How big is a typical board using the TPS2375-1?
The median is 74.3 × 57.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS2375-1?
By GitHub stars, Gated Passthrough by crawford, with 3 stars.
Can I simulate one of these boards using the TPS2375-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.