5 open source boards using the ENC28J60x-SS
Real designs built with the ENC28J60x-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
HexGateway
gblach
50 × 48 mm83 parts2LNo license10Raspberry Pi
OpenPLC
radioelf
129.5 × 72.6 mm163 parts2LNo license7STM32
Stm8s005-iot devboard
dilshan
87.9 × 55.4 mm82 parts2LGPL-2.05Raspberry Pi
Ethernet4pizero
lightside-instruments
85 × 56 mm25 parts4LTAPR-OHL-1.01Raspberry Pi
Ethernet4pizero poe
Slenderman00
85 × 56 mm34 parts4LTAPR-OHL-1.00
How designs wire the ENC28J60x-SS
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ENC28J60x-SS connects to, and the resistors, capacitors and other passives placed on it.
- The VCAP pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
- The RBIAS pin has a resistor to GND on 5 of 5 designs, most often 2.32 kΩ (then 2.7 kΩ).
- The VDDTX pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
- The VDDRX pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCAPpin 1 | Connected to: Signal 100% |
|
| VSSpin 2 | Connected to: GND 100% | — |
| CLKOUTpin 3 | Connected to: Not connected 60% · a signal 40% |
|
| WOLpin 5 | Connected to: Not connected 100% | — |
| CSpin 9 | Connected to: A connector 60%, the microcontroller 40% |
|
| RESETpin 10 | Connected to: Not connected 60% · a signal 40% | — |
| VSSRXpin 11 | Connected to: GND 100% | — |
| TPIN-pin 12 | Connected to: A connector 100% |
|
| TPIN+pin 13 | Connected to: A connector 100% |
|
| RBIASpin 14 | Connected to: Signal 100% |
|
| VDDTXpin 15 | Connected to: 3.3V 100% |
|
| TPOUT-pin 16 | Connected to: A connector 100% |
|
| TPOUT+pin 17 | Connected to: A connector 100% |
|
| VSSTXpin 18 | Connected to: GND 100% | — |
| VDDRXpin 19 | Connected to: 3.3V 100% |
|
| VDDPLLpin 20 | Connected to: 3.3V 100% |
|
| VSSPLLpin 21 | Connected to: GND 100% | — |
| VSSOSCpin 22 | Connected to: GND 100% | — |
| OSC1pin 23 | Connected to: DSC1001DE1-025.0000 40% |
|
| OSC2pin 24 | Connected to: Signal 60% · not connected 40% |
|
| VDDOSCpin 25 | Connected to: 3.3V 100% |
|
| LEDBpin 26 | Connected to: Signal 100% |
|
| LEDApin 27 | Connected to: Signal 100% |
|
| VDDpin 28 | Connected to: 3.3V 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HexGateway by gblach, OpenPLC by radioelf, Stm8s005-iot devboard by dilshan and Ethernet4pizero by lightside-instruments.
The ENC28J60x-SS in open source designs
The gallery holds 5 open source boards using the ENC28J60x-SS from 5 GitHub repositories; a typical one measures about 85 × 56 mm and carries around 82 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is HexGateway by gblach.
Parts used alongside the ENC28J60x-SS
Microcontrollers on boards using the ENC28J60x-SS
What boards using the ENC28J60x-SS are built for
ENC28J60x-SS: common questions
Where can I find a ENC28J60x-SS reference design?
Each of the 5 boards on this page is a real design using the ENC28J60x-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ENC28J60x-SS VCAP pin connected?
The VCAP pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the ENC28J60x-SS.
What resistor goes on the ENC28J60x-SS RBIAS pin?
The RBIAS pin has a resistor to GND on 5 of 5 designs, most often 2.32 kΩ (then 2.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the ENC28J60x-SS.
What decoupling capacitors do designs use on the ENC28J60x-SS VDDTX pin?
The VDDTX pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the ENC28J60x-SS.
Which microcontrollers do boards using the ENC28J60x-SS use?
Most are built on Raspberry Pi (3), ESP32 (1) and STM32 (1).
How big is a typical board using the ENC28J60x-SS?
The median is 85 × 56 mm, and 60% are two-layer designs.
What is the most popular open source board using the ENC28J60x-SS?
By GitHub stars, HexGateway by gblach, with 10 stars.
Can I simulate one of these boards using the ENC28J60x-SS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.