Soundalyser

Sn3akySqu1d·Soundalyser·Kicad/Soundalyser.kicad_pcb

Soundalyser PCB layout, top view — open source RP2040/RP2350 board by Sn3akySqu1d

About the Soundalyser PCB

Soundalyser is an open source RP2040/RP2350 PCB design by Sn3akySqu1d, published on GitHub. It is a 2-layer board measuring 87.6 × 85.3 mm, with 6 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 ICs, 1 buzzer and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

Key Features: 5 screens navigatable using a rotary encoder: Waveform, sound bar chart, mood screen that compares the current average sound levels to recommended limits, a stats screen that shows number of samples taken, minimum/maximum recorded sound levels and average sound leve

Key Features: 5 screens navigatable using a rotary encoder: Waveform, sound bar chart, mood screen that compares the current average sound levels to recommended limits, a stats screen that shows number of samples taken, minimum/maximum recorded sound levels and average sound level and a screen that shows details about the SD card.

Data is logged to a csv file on an SD card every 10 minuites so that it can be saved and analysed later. A sample is taken once a second.

Soundalyser, from the project README
From the project README

Main components on the Soundalyser

Soundalyser bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
~
U2
2
~
U3, U4
1
Buzzer
BZ1
1
RotaryEncoder_Switch
SW1

Soundalyser design files

The KiCad project lives in the Sn3akySqu1d/Soundalyser repository on GitHub; these links point at the commit this page was built from.

Soundalyser: common questions

What microcontroller does the Soundalyser use?

The Soundalyser is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Soundalyser PCB?

The Soundalyser measures 87.6 × 85.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soundalyser?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soundalyser design files?

From the Sn3akySqu1d/Soundalyser repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soundalyser design in my own project?

The repository has no license, so all rights stay with Sn3akySqu1d. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Soundalyser without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards