Squidboard

Sn3akySqu1d·Squidboard·Kicad/Mechboard/Mechboard.kicad_pcb

Squidboard PCB layout, top view — open source RP2040/RP2350 board by Sn3akySqu1d

About the Squidboard PCB

Squidboard is an open source RP2040/RP2350 PCB design by Sn3akySqu1d, published on GitHub. It is a 2-layer board measuring 345.3 × 106.4 mm, with 133 components from 13 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 69 diodes, 62 switches, 1 module and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Squidboard is a tilted, 60% keyboard with a rotary encoder and oled display. It has a pomodoro timer, animations and more.

Squidboard, from the project README
From the project README

Main components on the Squidboard

Squidboard bill of materials (BOM)

133 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
OLED_128X64
OLED_128x64
J1
46
Keyswitch
S1, S2, S3, S4, S5, S6, S7, S8 +38
1
Keyswitch
S14
2
Keyswitch
S15, S28
1
Keyswitch
S29
2
Keyswitch
S41, S42
1
Keyswitch
S53
7
Keyswitch
S54, S55, S56, S58, S59, S60, S61
1
Keyswitch
S57
1
RotaryEncoder_Switch
SW1
61
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +53
8
SK6812MINI
D62, D63, D64, D65, D66, D67, D68, D69

Squidboard design files

The KiCad project lives in the Sn3akySqu1d/Squidboard repository on GitHub; these links point at the commit this page was built from.

Squidboard: common questions

What microcontroller does the Squidboard use?

The Squidboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Squidboard PCB?

The Squidboard measures 345.3 × 106.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Squidboard?

133 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Squidboard design files?

From the Sn3akySqu1d/Squidboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Squidboard design in my own project?

The repository has no license, so all rights stay with Sn3akySqu1d. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Squidboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards