CS4344

sneakylizard123-4·CS4344·kicad/CS4344.kicad_pcb

CS4344 PCB layout, top view — open source board by sneakylizard123-4

About the CS4344 PCB

CS4344 is an open source PCB design by sneakylizard123-4, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 18.5 × 25 mm, with 14 components from 9 distinct parts.

Other key parts include the CS4344. By type, the board carries 7 capacitors, 4 resistors, 2 connectors and 1 IC.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

A compact 24-bit / 192 kHz stereo DAC for I2S audio projects.

A compact 24-bit / 192 kHz stereo DAC for I2S audio projects.

The CS4344 is a 24-bit stereo DAC that accepts I2S audio and runs from a single 3.3 V supply. This board gives it a 6-pin 2.54 mm header, a 3.5 mm stereo jack, and the passives it needs. There is no configuration bus. The DAC is in hardware mode, so the host only has to provide clocks and data.

The PCB is 18.5 x 25.0 mm, two layers. The repository also includes a STEP assembly, a parametric 3D-printable case, and an ESP32-S3 test firmware example.

CS4344, from the project README
From the project README

Main components on the CS4344

CS4344 bill of materials (BOM)

14 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CS4344
U1
1
AUDIOJACK3
AudioJack3
J1
1
CONN_01X06
Conn_01x06
J2
2
10UF
10uF
C1, C4
2
0.1UF
0.1uF
C2, C5
1
1UF
1uF
C3
2
3.3UF
3.3uF
C6, C7
2
10K
10k
R1, R2
2
470
R3, R4

CS4344 design files

The KiCad project lives in the sneakylizard123-4/CS4344 repository on GitHub; these links point at the commit this page was built from.

CS4344: common questions

How big is the CS4344 PCB?

The CS4344 measures 18.5 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CS4344?

14 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CS4344 design files?

From the sneakylizard123-4/CS4344 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CS4344 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which sneakylizard123-4 chose for the repository.

Similar boards