Supernight
sneecat·supernight
About the Supernight PCB
Supernight is an open source ESP32 PCB design by sneecat, published on GitHub under the MIT license. It is a 4-layer board measuring 87.3 × 45.4 mm, with 55 components from 30 distinct parts.
Its main chip is the ESP32, from the ESP32 family. Other key parts include the LMR33640ADDA, LMR33610ADDA and EL7202CN. By type, the board carries 22 capacitors, 18 resistors, 4 ICs, 3 transistors, 2 connectors and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Wireless multi-color LED Dimmer for events, film/video, and installations
- High current capability (8A per-channel) - 10 bit dimming - 25kHz+ PWM for flicker-free film operation - Lo-Mode 1kHz PWM for higher contrast ratio - Physical controls - Manual override - ArtNet compatible (lumenair, etc.)
This is a work in progress. Currently I am going into software development, to ensure that my PCB is sound before ordering.
Main components on the Supernight
Supernight bill of materials (BOM)
55 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 | ESP32-WROOM-32 | U1 |
| 1 | LMR33640ADDA | PowerPad-SOIC-8 | U2 |
| 1 | LMR33610ADDA | PowerPad-SOIC-8 | U3 |
| 1 | EL7202CN | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | BC847C | SOT-23 | Q1 |
| 2 | DMN3010LK3 | TO-252-2 | Q2, Q3 |
| 1 | Conn_01x06_Female | TerminalBlock_Phoenix_PT-1,5-6-5.0-H_1x06_P5.00mm_Horizontal | J1 |
| 1 | Conn_02x04_Odd_Even | JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J2 |
| 1 | SW_SPST | SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1 |
| 1 | 10K | R_0805_2012Metric | TH1 |
| 1 | D | D_SMB | D1 |
| 1 | LED | LED_0805_2012Metric_Castellated | D2 |
| 1 | 22uH | L_Bourns-SRN1060 | L1 |
| 1 | 8.2uH | L_Bourns_PM42S | L2 |
| 2 | 330uF | CP_Elec_10x10.5 | C1, C2 |
| 3 | 10uF | C_1206_3216Metric | C4, C10, C11 |
| 4 | 1uF | C_0805_2012Metric | C5, C12, C13, C23 |
| 8 | 100nF | C_0805_2012Metric | C6, C7, C8, C9, C14, C15, C19, C20 |
| 1 | 10pF | C_0603_1608Metric | C16 |
| 1 | 5pF | C_0603_1608Metric | C17 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 47uF | CP_EIA-6032-28_Kemet-C | C18, C21, C22 |
| 2 | 4.7K | R_0603_1608Metric | R1, R2 |
| 4 | 1K | R_0603_1608Metric | R3, R4, R14, R15 |
| 5 | 100K | R_0603_1608Metric | R5, R9, R10, R16, R17 |
| 2 | 10K | R_0603_1608Metric | R6, R8 |
| 1 | 1.4K | R_0603_1608Metric | R7 |
| 1 | 9.09K | R_0603_1608Metric | R11 |
| 1 | 43.2K | R_0603_1608Metric | R12 |
| 1 | 33R | R_0805_2012Metric | R13 |
| 1 | 10K | R_0805_2012Metric | R18 |
Supernight design files
The KiCad project lives in the sneecat/supernight repository on GitHub; these links point at the commit this page was built from.
- Layoutsupernight2.kicad_pcb
Supernight: common questions
What microcontroller does the Supernight use?
The Supernight is built around the ESP32, from the ESP32 family.
How big is the Supernight PCB?
The Supernight measures 87.3 × 45.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Supernight?
55 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Supernight design files?
From the sneecat/supernight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Supernight design in my own project?
Yes, under the terms of its MIT license, which sneecat chose for the repository.
Can I test firmware for the Supernight without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k