Digirig Mobile
About the Digirig Mobile PCB
Digirig Mobile is an open source PCB design by softcomplex, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 22.8 × 36 mm, with 53 components from 22 distinct parts.
Other key parts include the CP2102N-A02-GQFN24, USB2412-DZK-TR, ADM3101E and CM108B. By type, the board carries 22 capacitors, 19 resistors, 4 ICs, 3 connectors, 2 transistors and 1 crystal.
It belongs with the rf & radio designs in this gallery.
From the project
Integrated digital modes interface for amateur radio
Main components on the Digirig Mobile
Digirig Mobile bill of materials (BOM)
53 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-A02-GQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | USB2412-DZK-TR | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | ADM3101E | QFN-12-1EP_3x3mm_P0.51mm_EP1.45x1.45mm | U3 |
| 1 | CM108B | LQFP-48_7x7mm_P0.5mm | U4 |
| 2 | MMBT5551L | SOT-23 | Q1, Q2 |
| 1 | 24MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | USB | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | PJ-320A-GREEN | Jack_3.5mm_PJ320D_Horizontal | J2 |
| 1 | PJ-320A | Jack_3.5mm_PJ320D_Horizontal | J3 |
| 1 | 0.02A | R_0603_1608Metric | TH1 |
| 1 | GS2005ELD | D_SOD-923 | D1 |
| 8 | 10uF | C_0402_1005Metric | C1, C3, C9, C15, C18, C20, C21, C22 |
| 10 | 100nF | C_0402_1005Metric | C2, C4, C5, C8, C10, C11, C12, C13 +2 |
| 2 | 27pF | C_0402_1005Metric | C6, C7 |
| 2 | 1nF | C_0402_1005Metric | C23, C24 |
| 7 | 12K | R_0402_1005Metric | R1, R10, R15, R17, R18, R19, R20 |
| 1 | 27K | R_0402_1005Metric | R2 |
| 2 | 5K1 | R_0402_1005Metric | R3, R5 |
| 5 | 100K | R_0402_1005Metric | R4, R6, R7, R8, R16 |
| 1 | 1M | R_0402_1005Metric | R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 33 | R_0402_1005Metric | R11, R12 |
| 1 | 1K5 | R_0402_1005Metric | R13 |
Digirig Mobile design files
The KiCad project lives in the softcomplex/Digirig-Mobile repository on GitHub; these links point at the commit this page was built from.
Digirig Mobile: common questions
How big is the Digirig Mobile PCB?
The Digirig Mobile measures 22.8 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digirig Mobile?
53 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digirig Mobile design files?
From the softcomplex/Digirig-Mobile repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Digirig Mobile design in my own project?
Yes, under the terms of its GPL-3.0 license, which softcomplex chose for the repository.
More boards in Digirig-Mobile
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568