Digirig shack
About the Digirig shack PCB
Digirig shack is an open source PCB design by softcomplex, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 50 mm, with 61 components from 29 distinct parts.
Other key parts include the TUSB2046, CM108, CP2102N-A01 and PC817. By type, the board carries 25 capacitors, 17 resistors, 5 ICs, 5 connectors, 2 crystals and 2 transformers.
It belongs with the rf & radio designs in this gallery.
From the project
Integrated digital modes interface for amateur radio
Main components on the Digirig shack
Digirig shack bill of materials (BOM)
61 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TUSB2046 | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CM108 | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | CP2102N-A01 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 2 | PC817 | SMDIP-4_W7.62mm | U4, U5 |
| 1 | 6MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | 12MHz | Crystal_SMD_HC49-SD | Y2 |
| 1 | USB_B_Micro | USB_MICRO_A01SB141B1-298 | J1 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J2 |
| 1 | PTT/CW | jack_3.5_pj313d-smt | J3 |
| 1 | Serial | jack_3.5_pj313d-smt | J4 |
| 1 | Audio | jack_3.5_pj313d-smt | J5 |
| 2 | 10K | Potentiometer_Bourns_TC33X_Vertical | RV1, RV2 |
| 2 | 600/600 Audio | Audio_Transformer | T1, T2 |
| 1 | SP0503BAHT | SOT-143 | D1 |
| 1 | PWR (RED) | LED_0402_1005Metric | D2 |
| 1 | 2.2mH | CD74R | L1 |
| 6 | 100nF | C_0402_1005Metric | C1, C4, C7, C15, C21, C23 |
| 10 | 10uF | C_0402_1005Metric | C2, C5, C8, C11, C12, C13, C20, C22 +2 |
| 4 | 27pF | C_0402_1005Metric | C3, C6, C9, C10 |
| 1 | 22uF | C_0402_1005Metric | C14 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100pF | C_0402_1005Metric | C18, C19, C26, C27 |
| 1 | 10K | R_0402_1005Metric | R1 |
| 1 | 1K | R_0402_1005Metric | R2 |
| 8 | 33 | R_0402_1005Metric | R3, R4, R7, R8, R9, R10, R16, R17 |
| 2 | 1.5K | R_0402_1005Metric | R5, R6 |
| 1 | 22K | R_0402_1005Metric | R11 |
| 1 | 47K | R_0402_1005Metric | R12 |
| 1 | 1M | R_0402_1005Metric | R13 |
| 2 | 470 | R_0402_1005Metric | R14, R15 |
Digirig shack design files
The KiCad project lives in the softcomplex/Digirig-Mobile repository on GitHub; these links point at the commit this page was built from.
Digirig shack: common questions
How big is the Digirig shack PCB?
The Digirig shack measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digirig shack?
61 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digirig shack design files?
From the softcomplex/Digirig-Mobile repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Digirig shack design in my own project?
Yes, under the terms of its GPL-3.0 license, which softcomplex chose for the repository.
More boards in Digirig-Mobile
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568