125kHz RFID board

SolderedElectronics·125kHz-RFID-I2C-board-qwiic-hardware-design·CAD/V2.3.0/125kHz RFID board.kicad_pcb

125kHz RFID board layout, top view — open source AVR/Arduino board by SolderedElectronics

About the 125kHz RFID board

125kHz RFID board is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 68 components from 35 distinct parts.

Its main chip is the ATTINY1604-SSNR, from the AVR/Arduino family. Other key parts include the NMOS-DUAL, LM358DR and TPS613222A. By type, the board carries 24 resistors, 15 capacitors, 7 relays, 6 jumpers, 5 ICs and 5 diodes.

From the project

Hardware design, BOM, gerbers and 3D files for 125kHz-RFID-I2C-board-qwiic designed by Soldered Electronics.

RFID is a type of communication in which information is transmitted wirelessly (Wikipedia article). Today, it is becoming increasingly popular and can be found in numerous and various cards: driving licenses, access control to buildings, public transportation, etc.

RFID readers come in many forms and variants. This reader, from our production, enables easy connection to a microcontroller, thereby opening up possibilities for developing various projects based on RFID technology. The breakout comes in two versions, and depending on the version, it is programmed and ready for communication via…

125kHz RFID board, from the project README
From the project README

Main components on the 125kHz RFID board

125kHz RFID board bill of materials (BOM)

68 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY1604-SSNR
U1
2
NMOS-DUAL
U2, U6
1
LM358DR
SGM358YMS/TR
U3
1
TPS613222A
SE5218
U4
1
SI2301DS
Q1
1
SI2302DS
Q2
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
SMD_JUMPER_3_PAD_TRACE
JP1, JP2
2
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP3, JP4
1
SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK
JP5
1
SMD_JUMPER
JP6
1
S2B-XH-A
S2B-XH-A(LF)(SN)
K1
1
HEADER-UPDI
K2
2
easyC-SMD
K3, K5
1
HEADER_MALE_5X1
K4
1
HEADER_MALE_4X1
K6
1
DSHP03TS-S
K7
3
M4_DIODA
D1, D2, D3
2
blue
D4, D5
5
100N
100n
C1, C2, C9, C10, C15
Show 15 more
QtyPartRefs
5
C0603C102K5RACTU
C3, C4, C5, C6, C8
1
CL21A475KBQNNNE
C7
2
CL10A226MP8NUNE
2u2
C11, C13
1
CL21A475KBQNNNE
100n
C12
1
10U
10u
C16
5
1k
R1, R2, R17, R18, R19
4
10K
10k
R3, R4, R6, R7
1
220
10R
R5
1
10R
R8
3
1M
R9, R10, R13
1
220R
R11
1
100K
100k
R12
1
4k7
R14
5
10k
R15, R21, R22, R23, R24
2
2K2
2k2
R16, R20

125kHz RFID board design files

The KiCad project lives in the SolderedElectronics/125kHz-RFID-I2C-board-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.

125kHz RFID board: common questions

What microcontroller does the 125kHz RFID board use?

The 125kHz RFID board is built around the ATTINY1604-SSNR, from the AVR/Arduino family.

How big is the 125kHz RFID board?

The 125kHz RFID board measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 125kHz RFID board?

68 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 125kHz RFID board design files?

From the SolderedElectronics/125kHz-RFID-I2C-board-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 125kHz RFID board design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the 125kHz RFID board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 125kHz-RFID-I2C-board-qwiic-hardware-design

Similar boards