2-channel relay board with easyC
SolderedElectronics·2-channel-relay-board-with-easyC-hardware-design·CAD/V1.2.0/2-channel relay board with easyC.kicad_pcb
About the 2-channel relay board with easyC
2-channel relay board with easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 70 × 38 mm, with 42 components from 23 distinct parts.
Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the PC357_OPTO and TPS613222A. By type, the board carries 11 resistors, 8 relays, 5 diodes, 4 ICs, 4 capacitors and 3 jumpers.
From the project
Hardware design, BOM, gerbers and 3D files for 2-channel-relay-board-with-easyC designed by Soldered Electronics.
Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

Main components on the 2-channel relay board with easyC
2-channel relay board with easyC bill of materials (BOM)
42 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PC357_OPTO | PC357_OPTO | U1, U3 |
| 1 | ATTINY404-SSNR | SOIC-14 | U2 |
| 1 | TPS613222A | tps613222a | U4 |
| 2 | NPN-SOT-23-3 | SOT-23-3 | Q1, Q2 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 3 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1, JP2, JP3 |
| 2 | easyC-SMD | easyC-connector | K1, K4 |
| 1 | HEADER-UPDI | HEADER-UPDI | K2 |
| 2 | SRD-05VDC-SL-C | SRD_RELAY_5V | K3, K6 |
| 2 | TERMINAL_KF235-5.0-3P | TERMINAL_KF235-5.0-3P | K5, K7 |
| 1 | DSHP03TS-S | DSHP03TS-S | K8 |
| 2 | blue | 0402LED | D1, D4 |
| 2 | M4_DIODA | M4_DIODA | D2, D5 |
| 1 | purple | 0402LED | D3 |
| 1 | DFE201612E-2R2M=P2 | 0806L | L1 |
| 1 | 100N 100n | 0603C | C1 |
| 2 | CL10A226MPCNUBE | 0603C | C2, C3 |
| 1 | C1608X7S1A475K080AC | 0603C | C4 |
| 2 | 100R | 0603R | R1, R8 |
| 3 | 2K2 2k2 | 0402R | R2, R7, R9 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 330R | 0603R | R3, R10 |
| 2 | 10R | 0603R | R4, R11 |
| 2 | 10K 10k | 0603R | R5, R6 |
2-channel relay board with easyC design files
The KiCad project lives in the SolderedElectronics/2-channel-relay-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.
2-channel relay board with easyC: common questions
What microcontroller does the 2-channel relay board with easyC use?
The 2-channel relay board with easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.
How big is the 2-channel relay board with easyC?
The 2-channel relay board with easyC measures 70 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2-channel relay board with easyC?
42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2-channel relay board with easyC design files?
From the SolderedElectronics/2-channel-relay-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2-channel relay board with easyC design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the 2-channel relay board with easyC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 2-channel-relay-board-with-easyC-hardware-design
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k