2-channel relay board with easyC panel

SolderedElectronics·2-channel-relay-board-with-easyC-hardware-design·CAD/V1.2.0/PANEL/2-channel relay board with easyC_panel.kicad_pcb

2-channel relay board with easyC panel layout, top view — open source AVR/Arduino board by SolderedElectronics

About the 2-channel relay board with easyC panel

2-channel relay board with easyC panel is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 5 × 7 mm, with 42 components from 23 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the PC357_OPTO and TPS613222A. By type, the board carries 11 resistors, 8 relays, 5 diodes, 4 ICs, 4 capacitors and 3 jumpers.

From the project

Hardware design, BOM, gerbers and 3D files for 2-channel-relay-board-with-easyC designed by Soldered Electronics.

Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

2-channel relay board with easyC panel, from the project README
From the project README

Main components on the 2-channel relay board with easyC panel

2-channel relay board with easyC panel bill of materials (BOM)

42 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
PC357_OPTO
U1, U3
1
ATTINY404-SSNR
U2
1
TPS613222A
U4
2
NPN-SOT-23-3
Q1, Q2
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
3
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP1, JP2, JP3
2
easyC-SMD
K1, K4
1
HEADER-UPDI
K2
2
SRD-05VDC-SL-C
K3, K6
2
TERMINAL_KF235-5.0-3P
K5, K7
1
DSHP03TS-S
K8
2
blue
D1, D4
2
M4_DIODA
D2, D5
1
purple
D3
1
DFE201612E-2R2M=P2
L1
1
100N
100n
C1
2
CL10A226MPCNUBE
C2, C3
1
C1608X7S1A475K080AC
C4
2
100R
R1, R8
3
2K2
2k2
R2, R7, R9
Show 3 more
QtyPartRefs
2
330R
R3, R10
2
10R
R4, R11
2
10K
10k
R5, R6

2-channel relay board with easyC panel design files

The KiCad project lives in the SolderedElectronics/2-channel-relay-board-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

2-channel relay board with easyC panel: common questions

What microcontroller does the 2-channel relay board with easyC panel use?

The 2-channel relay board with easyC panel is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the 2-channel relay board with easyC panel?

The 2-channel relay board with easyC panel measures 5 × 7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2-channel relay board with easyC panel?

42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 2-channel relay board with easyC panel design files?

From the SolderedElectronics/2-channel-relay-board-with-easyC-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the 2-channel relay board with easyC panel design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the 2-channel relay board with easyC panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 2-channel-relay-board-with-easyC-hardware-design

Similar boards