Current sensor-30A-ACS712-breakout hardware design
SolderedElectronics·Current-sensor-30A-ACS712-breakout-hardware-design·CAD/V2.0.0/Current_sensor_ACS712.kicad_pcb
About the Current sensor-30A-ACS712-breakout hardware design
Current sensor-30A-ACS712-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 22 mm, with 21 components from 17 distinct parts.
Other key parts include the ACS712 and OPA344. By type, the board carries 6 capacitors, 6 resistors, 3 ICs, 3 relays and 1 jumper.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for Current-sensor-30A-ACS712-breakout designed by Soldered Electronics.
Digital ammeter ACS172 is a digital device that is able to measure the current flow connected to its terminals. It works by hall-effect with a relatively small error, and read current is given on the output as voltage, so it is read by Dasduino / Arduino easily. Also, terminals on which the amount of electricity is measured are isolated from the rest of the chip and allow safe use.

Main components on the Current sensor-30A-ACS712-breakout hardware design
Current sensor-30A-ACS712-breakout hardware design bill of materials (BOM)
21 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACS712 | SOIC-8-SWB | U1 |
| 1 | OPA344 | SOT-23-5 | U2 |
| 1 | OPA344 | SOT-23-5 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP1 |
| 1 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K1 |
| 1 | HEADER_MALE_3X1 HEADER_MALE_4X1 | HEADER_MALE_4X1 | K2 |
| 1 | DSHP03TS-S | DSHP03TS-S | K3 |
| 1 | 10n | 0603C | C1 |
| 3 | 100N 100n | 0603C | C2, C3, C5 |
| 1 | 100P 2u2 | 0603C | C4 |
| 1 | 100n | 0603C | C6 |
| 1 | 47K 10k | 0603R | R1 |
| 1 | 10k | 0603R | R2 |
| 2 | TC33X-2-103E 10k | 0603R | R3, R4 |
| 1 | 100k | 0603R | R5 |
| 1 | 200k | 0603R | R6 |
Current sensor-30A-ACS712-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/Current-sensor-30A-ACS712-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
Current sensor-30A-ACS712-breakout hardware design: common questions
How big is the Current sensor-30A-ACS712-breakout hardware design?
The Current sensor-30A-ACS712-breakout hardware design measures 38 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Current sensor-30A-ACS712-breakout hardware design?
21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Current sensor-30A-ACS712-breakout hardware design design files?
From the SolderedElectronics/Current-sensor-30A-ACS712-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Current sensor-30A-ACS712-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k