Digital light---proximity sensor-LTR-507ALS-breakout hardware design

SolderedElectronics·Digital-light---proximity-sensor-LTR-507ALS-breakout-hardware-design·CAD/V1.1.1/Light_sensor_LTR-507ALS-01.kicad_pcb

Digital light---proximity sensor-LTR-507ALS-breakout hardware design layout, top view — open source board by SolderedElectronics

About the Digital light---proximity sensor-LTR-507ALS-breakout hardware design

Digital light---proximity sensor-LTR-507ALS-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 25 components from 15 distinct parts.

Other key parts include the NMOS-DUAL, LTR-507ALS-01 and SE5218. By type, the board carries 5 jumpers, 5 resistors, 4 relays, 4 capacitors and 3 ICs.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Digital-light-&-proximity-sensor-LTR-507ALS-breakout designed by Soldered Electronics.

For very precise measurements of the amount of light, take this digital light sensor into account (ALS – Ambient Light Sensor). In addition, the LTR-507ALS also measures the proximity (PS – Proximity Sensor) of the object to the sensor. It sends all this data via I2C communication, which is easy to read via our Arduino library.

This repository contains all design files for Digital light & proximity sensor LTR-507 breakout, organized as follows:

Digital light---proximity sensor-LTR-507ALS-breakout hardware design, from the project README
From the project README

Main components on the Digital light---proximity sensor-LTR-507ALS-breakout hardware design

Digital light---proximity sensor-LTR-507ALS-breakout hardware design bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NMOS-DUAL
U1
1
LTR-507ALS-01
U2
1
SE5218
U3
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
2
SMD_JUMPER_3_PAD_TRACE
JP1, JP2
1
JUMPER_3_RIGHT
JP3
1
SMD-JUMPER-CONNECTED_TRACE_SLODERMASK
JP4
1
SMD_JUMPER
JP5
1
HEADER_MALE_3X1
K1
2
easyC-SMD
K2, K4
1
HEADER_MALE_4X1
K3
1
4U7
4u7
C1
1
100N
100n
C2
2
2.2UF
2u2
C3, C4
5
10K
10k
R1, R2, R3, R4, R5

Digital light---proximity sensor-LTR-507ALS-breakout hardware design design files

The KiCad project lives in the SolderedElectronics/Digital-light---proximity-sensor-LTR-507ALS-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Digital light---proximity sensor-LTR-507ALS-breakout hardware design: common questions

How big is the Digital light---proximity sensor-LTR-507ALS-breakout hardware design?

The Digital light---proximity sensor-LTR-507ALS-breakout hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Digital light---proximity sensor-LTR-507ALS-breakout hardware design?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Digital light---proximity sensor-LTR-507ALS-breakout hardware design design files?

From the SolderedElectronics/Digital-light---proximity-sensor-LTR-507ALS-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Digital light---proximity sensor-LTR-507ALS-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Similar boards