GNSS-GPS-L86-M33-breakout hardware design
SolderedElectronics·GNSS-GPS-L86-M33-breakout-hardware-design·CAD/V1.2.0/GNSS_breakout_L86-M33.kicad_pcb
About the GNSS-GPS-L86-M33-breakout hardware design
GNSS-GPS-L86-M33-breakout hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 54 mm, with 33 components from 21 distinct parts.
Other key parts include the NMOS-DUAL, L86-M33 and SE5218. By type, the board carries 10 resistors, 4 jumpers, 4 diodes, 4 capacitors, 3 ICs and 3 relays.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for GNSS-GPS-L86-M33-breakout designed by Soldered Electronics.
Global Navigation Satellite Systems (GNSS), or as we all like to call it “GPS,” enable precise location determination on Earth. Thanks to this module, you can use GNSS for your project and employ the device for asset tracking or create a wearable device. The module is small, energy-efficient, highly effective, and easy to use thanks to its built-in antenna.
L86-M33 is a GNSS receiver, meaning it can receive signals from GPS, GLONASS, and Galileo constellations. Equipped with EASY (Embedded Assist System for self-generated orbit prediction) and AlwaysLocate technologies, the L86-M33 ensures…

Main components on the GNSS-GPS-L86-M33-breakout hardware design
GNSS-GPS-L86-M33-breakout hardware design bill of materials (BOM)
33 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMOS-DUAL | SOT-363 | U1 |
| 1 | L86-M33 | L86-M33 | U2 |
| 1 | SE5218 | SOT-23-5 | U3 |
| 1 | NPN-SOT-23-3 | SOT-23-3 | Q1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 3 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1, JP3, JP4 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP2 |
| 1 | IPX connector with SMA | IPX connector with SMA | K1 |
| 1 | CR1220_HOLDER | CR1220_HOLDER | K2 |
| 1 | HEADER_MALE_8X1 | HEADER_MALE_8X1 | K3 |
| 2 | M4_DIODA | M4_DIODA | D1, D2 |
| 1 | purple | 0402LED | D3 |
| 1 | blue | 0402LED | D4 |
| 1 | 100N 100n | 0603C | C1 |
| 1 | 10U 10u | 1206C | C2 |
| 2 | 2U2 2u2 | 0603C | C3, C4 |
| 1 | 5K1 5k1 | 0603R | R1 |
| 1 | 4K7 4k7 | 0603R | R2 |
| 5 | 10K 10k | 0603R | R3, R4, R5, R7, R8 |
| 1 | 47K 47k | 0603R | R6 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2K2 2k2 | 0402R | R9, R10 |
GNSS-GPS-L86-M33-breakout hardware design design files
The KiCad project lives in the SolderedElectronics/GNSS-GPS-L86-M33-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.
GNSS-GPS-L86-M33-breakout hardware design: common questions
How big is the GNSS-GPS-L86-M33-breakout hardware design?
The GNSS-GPS-L86-M33-breakout hardware design measures 38 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GNSS-GPS-L86-M33-breakout hardware design?
33 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GNSS-GPS-L86-M33-breakout hardware design design files?
From the SolderedElectronics/GNSS-GPS-L86-M33-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GNSS-GPS-L86-M33-breakout hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979