HardLabs

GNSS GPS L86-M33 breakout with easyC panel

SolderedElectronics·GNSS-GPS-L86-M33-breakout-with-easyC-hardware-design·CAD/V1.1.0/PANEL/GNSS GPS L86-M33 breakout with easyC_panel.kicad_pcb

GNSS GPS L86-M33 breakout with easyC panel layout, top view — open source AVR/Arduino board by SolderedElectronics

About the GNSS GPS L86-M33 breakout with easyC panel

GNSS GPS L86-M33 breakout with easyC panel is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 162 × 164 mm, with 31 components from 20 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the L86-M33. By type, the board carries 9 resistors, 6 relays, 4 diodes, 3 capacitors, 2 ICs and 2 jumpers.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for GNSS-GPS-L86-M33-breakout-with-easyC designed by Soldered Electronics.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the GNSS GPS L86-M33 breakout with easyC panel

L86-M33ATTINY404-SSNR

GNSS GPS L86-M33 breakout with easyC panel bill of materials (BOM)

31 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L86-M33
U2
1
ATTINY404-SSNR
U5
1
NPN
Q1
4
HOLE_3.2mm
H1, H2, H3, H4
2
SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK
JP2, JP4
1
IPX connector with SMA
K1
1
CR1220_HOLDER
K3
2
easyC-SMD
K5, K7
1
HEADER-UPDI
K6
1
DSHP03TS-S
K8
2
M4_DIODA
D1, D2
1
purple
D3
1
blue
D4
2
100n
C2, C5
1
10u
C3
2
1k
R1, R3
1
4k7
R2
3
10k
R4, R5, R7
1
47k
R6
2
2k2
R9, R10

GNSS GPS L86-M33 breakout with easyC panel design files

The KiCad project lives in the SolderedElectronics/GNSS-GPS-L86-M33-breakout-with-easyC-hardware-design repository on GitHub; these links point at the commit this page was built from.

GNSS GPS L86-M33 breakout with easyC panel: common questions

What microcontroller does the GNSS GPS L86-M33 breakout with easyC panel use?

The GNSS GPS L86-M33 breakout with easyC panel is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the GNSS GPS L86-M33 breakout with easyC panel?

The GNSS GPS L86-M33 breakout with easyC panel measures 162 × 164 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GNSS GPS L86-M33 breakout with easyC panel?

31 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GNSS GPS L86-M33 breakout with easyC panel design files?

From the SolderedElectronics/GNSS-GPS-L86-M33-breakout-with-easyC-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the GNSS GPS L86-M33 breakout with easyC panel design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the GNSS GPS L86-M33 breakout with easyC panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in GNSS-GPS-L86-M33-breakout-with-easyC-hardware-design

Similar boards